Ford F150 Pickup. Instruction — part 1068
7. Install the rocker arms, tighten the bolts in two stages.
Stage 1: Tighten the bolts to 5 Nm (44 lb-in).
Stage 2: Tighten the bolts to 35 Nm (26 lb-ft).
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 181: Installing Rocker Arms
Courtesy of FORD MOTOR CO.
8. If new valve train components have been installed, inspect the valve clearance. For
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
additional information, refer to ENGINE SYSTEM - GENERAL INFORMATION .
RH Cylinder Head
9. Install the generator mounting bracket.
1. Position the generator mounting bracket.
2. Install the long bolts.
3. Install the short bolt.
Fig. 182: Installing Generator Mounting Bracket
Courtesy of FORD MOTOR CO.
10. Install the idler pulley.
1. Position the idler pulley.
2. Install the bolt.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Fig. 183: Installing Idler Pulley
Courtesy of FORD MOTOR CO.
11. Install the generator. For additional information, refer to GENERATOR .
LH Cylinder Head
12. Install the A/C compressor mounting bracket and power steering pump.
1. Position the A/C compressor mounting bracket and power steering pump.
2. Start the bolt.
3. Install the bolts.
4. Install the nuts.
2003 Ford Pickup F150
2003 ENGINE Engine - 4.2L - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст