Ford F150 Pickup. Instruction — part 1864
Fig. 40: Adjusting Clutch Pressure Plate
Courtesy of FORD MOTOR CO.
REMOVAL & INSTALLATION
2003 Ford Pickup F150
2003 TRANSMISSIONS Instruction Transmission, Clutch & Transfer Case - General Information - F150 Pickup
DOWELS - FLYWHEEL
Removal
NOTE:
Take care not to damage the flywheel dowel holes or surface areas around
the flywheel dowel during removal.
2003 Ford Pickup F150
2003 TRANSMISSIONS Instruction Transmission, Clutch & Transfer Case - General Information - F150 Pickup
Fig. 41: Locating Flywheel Dowels
Courtesy of FORD MOTOR CO.
2003 Ford Pickup F150
2003 TRANSMISSIONS Instruction Transmission, Clutch & Transfer Case - General Information - F150 Pickup
1. Remove the flywheel dowels by using a drift pin where the flywheel dowel is installed in an open hole
and locking pliers where the flywheel dowel is installed in a blind hole.
Installation
1. Install all flywheel dowels by driving them into place using a brass or plastic mallet.
DOWELS - FLYWHEEL HOUSING TO BLOCK
Removal
1. Remove the flywheel housing to block dowel (6397) using a drift pin where the flywheel housing to
block dowel is installed in an open hole and locking pliers where the flywheel housing to block dowel is
installed in a blind hole.
Installation
1. Install all flywheel housing to block dowels by driving them into place using a brass or plastic mallet.
NOTE:
Care should be taken to drive the flywheel dowel squarely into place until
fully seated and to not damage surrounding surface areas.
NOTE:
Take care not to damage the flywheel housing to block dowel holes or
surface areas around the flywheel housing to block dowel hole during
removal.
NOTE:
Care should be taken to drive the flywheel housing to block dowel
squarely into place until fully seated without damaging the surrounding
surface areas.
2003 Ford Pickup F150
2003 TRANSMISSIONS Instruction Transmission, Clutch & Transfer Case - General Information - F150 Pickup
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст