Ford Falcon. Manual — part 101
211-05-1 Steering
Column
Switches 211-05-1
SECTION : 211-05 Steering Column Switches
VEHICLE APPLICATION : 2003.0 BA Falcon
CONTENTS
PAGE
DESCRIPTION AND OPERATION
Steering Column Switches . . . . . . . . . . . . . . . . . . . . . . . . . .211-05-2
Steering Column Switches . . . . . . . . . . . . . . . . . . . . . . . . ...211-05-2
DIAGNOSIS AND TESTING
Steering Column Switches . . . . . . . . . . . . . . . . . . . . . . . . . .211-05-3
Inspection and Verification . . . . . . . . . . . . . . . . . . . . . . . . ...211-05-3
Symptom
Chart
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211-05-3
Connector Circuit Reference . . . . . . . . . . . . . . . . . . . . . . . . 211-05-3
Pinpoint
Tests
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..211-05-5
REMOVAL AND INSTALLATION
Steering Column Multifunction Switch . . . . . . . . . . . . . . . . . . . . ...211-05-7
Ignition Key Barrel . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..211-05-7
Pedal Adjust Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . 211-05-7
211-05-2 Steering
Column
Switches 211-05-2
DESCRIPTION AND OPERATION
Steering Column Switches
Steering Column Switches
The steering column switches consist of the following:
Multifunction switch
Ignition switch
Pedal adjustment switch (if fitted)
G57380 en
211-05-3 Steering
Column
Switches 211-05-3
DIAGNOSIS AND TESTING
2. Visually inspect the ignition switch and the
Steering Column Switches
steering column multifunction switch for damage;
refer to the following chart:
Refer to Wiring Diagram Section 700-02 for schematic
and connector information.
Visual Inspection Chart
Mechanical
Special Tool(s)
Ignition switch
Multimeter
Turn signal switch (component of steering
WDS
column multifunction switch)
Wiper/washer switch (component of steering
column multifunction switch)
Pedal Adjust switch
3. If cause of the switch concern is not visually
apparent, proceed to Symptom Chart.
Inspection and Verification
1. Verify the customer concern by operating ignition
switch and the multifunction switch.
Symptom Chart
Condition
Source
Action
Ignition switch is inoperative (No
Ignition switch
Go to PinPoint Test A.
Circuitry
power in ACC/ON or START)
Battery
Wiper/washer, turn signal switch or
Steering column multifunction switch
Go to PinPoint Test B
headlamp switch does not operate
Circuitry
correctly
Battery
Adjustable pedals do not operate
Pedal adjustment switch
Go to PinPoint Test C
Pedal box
correctly
Circuitry
Battery
Connector Circuit Reference
C167 - View of Multifunction connector - Harness side
G57381 en
211-05-4 Steering
Column
Switches 211-05-4
DIAGNOSIS AND TESTING (Continued)
Pinout
Pin Number(s)
Circuit Designation/Description
Normal Condition/Measurement
1
175 Park
Red
2
57 Earth (H/Lamps)
Yellow
3
293 BEM (Auto H/Lamp)
Grey
5
590A Rear Wipe
Orange / Brown
6
20 Dipper (High Beam)
Green / Orange
7
942 Rear Wash
Blue
8
56 Wiper (High)
S/C to GND when high wipe on
Blue / Yellow
9
58Wiper (Low)
S/C to GND when low wipe on
White / Blue
10
589 Var Wiper Earth
Orange
11
993 Var Wipe (to BEM)
See “Intermittent Wipe” table below
Brown / White
12
18 Dipper (Low Beam)
Red / Yellow
13
2 Turn RH
S/C to pin17 when RH Ind activated
Brown / White
14
2 Turn RH
S/C to pin17 when RH Ind activated
Brown / White
16
57 Wiper, Dipper, rear wiper earth
Black, violet, pink
17
8 Turn Ign
Green / Red
20
3 Turn LH
S/C to pin17 when LH Ind activated
Green
22
941 Wash (to BEM)
S/C to GND when activated
Grey / Black
23
28 Wiper (Park)
Blue / Pink
24
59C Wiper (Int)
Green / White
Intermittent Wipe Resistance values
Detent
Resistance
1
400 - 600
Ω
2
1,372 - 1,678
Ω
3
2300 - 2800
Ω
4
3,218 - 3,933
Ω
5
4,140 - 5,060
Ω
G57381 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст