Ford Falcon. Manual — part 126
303-01b-18
Engine — 5.4L (3V)
303-01b-18
IN-VEHICLE REPAIR (Continued)
3. Install the belt idler and the bolt.
8. Install the drain plug.
4. Connect the CMP sensor.
9. Connect the CKP sensor.
5. Raise the vehicle.
10. Refit A/C compressor.
6. Tighten the sump bolts in three stages:
11. Position the power steering pump and install the
bolts.
a. Stage 1: Tighten to 2 Nm
b. Stage 2: Tighten to 20 Nm
c. Stage 3: Tighten an additional 60 degrees.
12. Install the crankshaft pulley. For additional
information, refer to Crankshaft Pulley in this
section.
7. Install the crankshaft front oil seal. For additional
information, refer to Crankshaft Front Oil Seal in
this section.
G89777 en
303-01b-19
Engine — 5.4L (3V)
303-01b-19
IN-VEHICLE REPAIR (Continued)
13. Install the water pump pulley and install the bolts.
VCT Sprocket Assemblies and VCT
Housings
Special Tool(s)
SST303-775 3 Valve Camshaft
Holding Tool
SST303-448 Crankshaft
Position Tool
14. Install the left and right valve cover. For additional
information, refer to Valve Cover-LH and Valve
Cover-RH in this section.
15. Refill the engine crankcase with clean engine oil.
Materials
Timing Gears, Chains, Tensioners,
Super Premium SAE
WSS-M2C153-H
5W-20
XO-5W20-QSP or
equivalent
Hydraulic Chain
1L3Z-6P250-AA
Tensioner Retaining Clip
G89778 en
303-01b-20
Engine — 5.4L (3V)
303-01b-20
IN-VEHICLE REPAIR (Continued)
Item
Description
1
RH timing chain tensioner
2
RH timing chain tensioner arm
3
LH timing chain tensioner arm
4
LH timing chain tensioner bolts
5
LH timing chain tensioner
6
RH timing chain tensioner bolts
G89778 en
303-01b-21
Engine — 5.4L (3V)
303-01b-21
IN-VEHICLE REPAIR (Continued)
Item
Description
1
RH timing chain
2
LH timing chain
3
Crankshaft sprocket
4
Ignition pulse wheel
G89778 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст