Ford Falcon. Manual — part 284
308-03b-50
Manual Transmission — TR3650
308-03b-50
ASSEMBLY (Continued)
59. Install the gear shift lever.
60. Install the clutch release hub and bearing and the
clutch release lever. For additional information,
refer to Section 308-01.
NOTE: Before installing the transmission, the ball
stud, the clutch release lever and the input shaft
guide tube must be cleaned and lubricated.
61. Fill the transmission with transmission fluid to the
specified level.
Transmission capacity is 3.8 liters (8.0 pints).
G34245 en
308-03b-51
Manual Transmission — TR3650
308-03b-51
INSTALLATION
Transmission
NOTE: Before installing the transmission, the ball
stud, clutch release lever and the input shaft must be
cleaned and lubricated. Use Motorcraft Premium
Long-Life Grease XG-1-C or XG-1-K or equivalent
meeting Ford specification ESA-M1C75-B.
Installation
1. To install, reverse the removal procedure. For
additional information, refer to Transmission in
this section.
Check, and as necessary, fill the transmission
with transmission fluid. The total fill capacity is
3.8L (8.0 pt).
2. Apply sealant to the fill plug threads and install
the fill plug.
Use pipe sealant with Teflon®.
G34246 en
308-06-1
Manual Transmission External Controls
308-06-1
SECTION : 308-06 Manual Transmission External
Controls
VEHICLE APPLICATION : 2003.0 BA Falcon
CONTENTS
PAGE
SPECIFICATIONS
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308-06-2
DIAGNOSIS AND TESTING
External Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..308-06-3
Inspection and Verification . . . . . . . . . . . . . . . . . . . . . . . . ...308-06-3
Symptom
Chart
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 308-06-3
Pinpoint
Tests
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . ..308-06-3
REMOVAL AND INSTALLATION
Gearshift Lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .308-06-5
Gearshift Boot and Retainer Assembly . . . . . . . . . . . . . . . . . . . . .308-06-5
308-06-2
Manual Transmission External Controls
308-06-2
SPECIFICATIONS
Torque Specifications
Description
Nm
Gearshift lever retaining nut
8.9 - 12.1
Gearshift lever retaining bolt
29.5 -40.3
Gearshift lever boot and retainer
8.9 - 12.1
assembly retainer nut
G73254 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст