Ford Falcon. Manual — part 376
417-01-43 Exterior
Lighting 417-01-43
DIAGNOSIS AND TESTING (Continued)
C-44 Wagon LH Tail Lamp
Pin Number(s)
Circuit Designation/Description
Normal Condition/Measurement
1
Circuit 140A (R-B)
0 voltage, less than 5 ohms between LH reverse
LH reverse lamp power input
lamp and either inhibitor switch and prndl switch
or reverse lamp switch
2
Circuit 57EJ (B)
0 voltage, less than 5 ohms between LH tail
LH tail lamp ground
lamp and chassis ground
C-45 Wagon RH Tail Lamp
Pin Number(s)
Circuit Designation/Description
Normal Condition/Measurement
1
Circuit 140B (R-B)
0 voltage, less than 5 ohms between RH reverse
RH reverse lamp power input
lamp and either inhibitor switch and prndl switch
or reverse lamp switch
2
Circuit 57EK (B)
0 voltage, less than 5 ohms between RH tail
RH tail lamp ground
lamp and chassis ground
C-77 Sedan RH Tail Lamp
Pin Number(s)
Circuit Designation/Description
Normal Condition/Measurement
1
Circuit 140B (R-B)
0 voltage, less than 5 ohms between RH reverse
RH reverse lamp power input
lamp and either inhibitor switch and prndl switch
or reverse lamp switch
2
Circuit 57EK (B)
0 voltage, less than 5 ohms between RH tail
RH tail lamp ground
lamp and chassis ground
G86732 en
417-01-44 Exterior
Lighting 417-01-44
DIAGNOSIS AND TESTING (Continued)
C-78 Sedan LH Tail Lamp
Pin Number(s)
Circuit Designation/Description
Normal Condition/Measurement
1
Circuit 140A (R-B)
0 voltage, less than 5 ohms between LH reverse
LH reverse lamp power input
lamp and either inhibitor switch and prndl switch
or reverse lamp switch
2
Circuit 57EJ (B)
0 voltage, less than 5 ohms between LH tail
LH tail lamp ground
lamp and chassis ground
C-705 Ute Cab Chassis RH Tail Lamp
Pin Number(s)
Circuit Designation/Description
Normal Condition/Measurement
1
Circuit 140A (R-B)
0 voltage, less than 5 ohms between RH reverse
RH reverse lamp power input
lamp and either inhibitor switch and prndl switch
or reverse lamp switch
2
Circuit 57A (B)
0 voltage, less than 5 ohms between RH tail
RH tail lamp ground
lamp and chassis ground
C-714 Ute Back Up Lamp
Pin Number(s)
Circuit Designation/Description
Normal Condition/Measurement
1
Circuit 140 (R-B)
0 voltage, less than 5 ohms between back up
LH back up lamp power input
lamp and either inhibitor switch and prndl switch
or reverse lamp switch
2
Circuit 57C (B)
0 voltage, less than 5 ohms between back up
LH back up lamp ground
lamp and chassis ground
G86732 en
417-01-45 Exterior
Lighting 417-01-45
DIAGNOSIS AND TESTING (Continued)
Inspection and Verification
Visual Inspection Chart
Mechanical
Electrical
Inhibitor switch and
Junction Box (JB):
PRNDL switch
Fuse 15 (15A)
Reverse lamp switch
Circuitry
Reverse lamp bulbs
Symptom Chart
Condition
Source
Action
The reversing lamps are inoperative
Power Distribution Box (PDB):
Go to PinPoint Test U
Fuse 15 (20A)
relay 4 (20 A)
Circuitry
Inhibitor switch and PRNDL switch
Reverse lamp switch
The individual reversing lamp is
Circuitry
Go to PinPoint Test V
inoperative
The reversing lamps are on
Circuitry
Go to PinPoint Test W
continuously
Inhibitor switch and PRNDL switch
Reverse lamp switch
Circuit 140 (W-R) open or short to ground
Pinpoint Tests
Circuit 57 (B) open
The reversing lamps are inoperative
Possible causes:
Circuit 140X (R-B) open or short to ground
Inhibitor switch and PRNDL switch C-26
Reverse lamp switch C-12
PINPOINT TEST U : THE REVERSE LAMPS ARE INOPERATIVE
Test Step
Result / Action to Take
U1
CHECK CIRCUIT 140X (R-B) VOLTAGE
Disconnect either:
Yes
Go to U2
(manual) Reverse Lamp Switch C-26.
(automatic) Inhibitor switch and PRNDL switch C-12.
No
Repair circuit 140X (R-B).
Turn ON ignition.
Test the system for normal operation.
Measure the voltage between (manual) Reverse Lamp Switch C-26,
circuit 140X (R-B), harness side or (automatic) Inhibitor switch and
PRNDL switch C-12, circuit 140X (R-B), harness side and ground.
Is the voltage greater than 10 volts?
U2
CHECK CIRCUIT 140 (W-R) FOR A SHORT TO GROUND
Measure the resistance between (manual) Reverse Lamp Switch
Yes
C-26, circuit 140 (W-R), harness side or (automatic) Inhibitor switch
Repair circuit 140 (W-R).
and PRNDL switch C-12, circuit 140 (W-R), harness side and ground. Test the system for normal operation.
Is the resistance less than 5 ohms?
No
Go to U3
G86732 en
417-01-46 Exterior
Lighting 417-01-46
DIAGNOSIS AND TESTING (Continued)
Test Step
Result / Action to Take
U3
CHECK CIRCUIT 140 (W-R) FOR AN OPEN
Disconnect: Inoperative tail lamp.
Yes
Go to U4
Measure the resistance between (manual) Reverse Lamp Switch
C-26, circuit 140 (W-R), harness side or (automatic) Inhibitor switch
No
and PRNDL switch C-12, circuit 140 (W-R), harness side and
Repair circuit 140 (W-R).
inoperative tail lamp, circuit 140 (R-B), harness side.
Test the system for normal operation.
Is the resistance less than 5 ohms?
U4
CHECK CIRCUIT 57ER (B) FOR AN OPEN
Measure the resistance between inoperative tail lamp, circuit 57 (B),
Yes
harness side and ground.
Perform the inhibitor switch and PRNDL switch
or reverse lamp switch testing in Section 307-01.
Is the resistance less than 5 ohms?
Test the system for normal operation.
No
Repair circuit 57 (B).
Test the system for normal operation.
The individual reversing lamp is inoperative
Possible causes:
Circuit 140 (W-R)
open
Circuit 57 (B) open
PINPOINT TEST V : THE INDIVUDUAL REVERSING LAMP IS INOPREATIVE
Test Step
Result / Action to Take
V1
CHECK THE VOLTAGE TO THE INOPERATIVE
REVERSING LAMP
Set the parking brake.
Yes
Repair circuit 57(B).
Key in ON position.
Test the system for normal operation.
Disconnect: inoperative reversing lamp.
No
Select REVERSE.
Repair circuit 140(W-R).
Test the system for normal operation.
Measure the voltage between the:
sedan left tail lamp C-78, circuit 140A (R-B) harness side-
sedan right tail lamp C-77, circuit 140B (R-B) harness side
wagon left tail lamp C-44, circuit 140A (R-B) harness side.
wagon right tail lamp C-45, circuit 140B (R-B) harness side.
Ute, non-SSB, right tail lamp C-705, circuit 140A (R-B) harness side.
Ute, non-SSB, left tail lamp C-707, circuit 140C (R-B) harness side.
Ute, SSB, back up lamp C-714, circuit 140 (R-B) harness side and
ground.
Is the voltage greater than 10 V?
The reversing lamps are on continuously
Possible causes:
Inhibitor switch and PRNDL switch C-26
Reverse lamp switch C-12
Circuit 140 (W-R) short to power
G86732 en
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст