Ford Probe (1997 year). Manual — part 17
73
Speed control cannot reduce the vehicle speed if
it increases above the set speed on a downhill. If
your vehicle speed is faster than the set speed
while driving on a downhill in
j
(Overdrive),
you may want to shift to the next lower gear to
reduce your vehicle’s speed.
WARNING
To keep your vehicle under control, do
not use speed control in heavy traffic or
on roads that are winding, slippery, or
unpaved.
To Set a Higher Speed
Press and hold SET ACC. Release the switch
when the desired vehicle speed is reached, or
Press and release SET ACC. Each press will
increase the set speed by 1 mph (1.6 km/h)
(2.0L with automatic transmission only), or
Accelerate with your accelerator pedal, then
press SET ACC.
You may accelerate with the accelerator pedal at
any time during speed control usage. Releasing
the accelerator pedal will return your vehicle
speed to the previously programmed set speed.
To Set a Lower Set Speed
Press and hold CST. Release the switch when the
desired vehicle speed is reached, or
Press and release CST. Each press will decrease
the set speed by 1 mph (1.6 km/h) (2.0L with
automatic transmission only), or
Depress the brake pedal. When the desired
vehicle speed is reached, press SET ACC.
74
To Disengage Speed Control
Depress the brake pedal, or
Depress the clutch pedal (if equipped).
Disengaging the speed control will not erase the
previously programmed set speed.
To Return to a Set Speed
Press RSM. For RSM to operate, the vehicle
speed must be faster than 30 mph (48 km/h).
Moon Roof (If equipped)
The control switch for the sliding moon roof is
on the interior/map lamp control panel located
above the windshield and between the sun
visors. The ignition must be in the ON position
for the moon roof to be operational.
To open the sliding moon roof to the vent
position, push the recessed part of the moon
roof switch until the back of the moon roof tilts
into the vent position. You must release the
switch after opening the vent before pressing it
again to slide the moon roof open. To close,
push the other side of the switch until the moon
roof sets back into place.
75
Sliding moon roof control switch
Press the switch until the moon roof is opened
to the desired position. When you release the
switch, the moon roof will stop sliding open. To
close the moon roof, press the other side of the
switch and hold it until the roof is closed to the
desired position.
76
Doors
The inside of the door
If you close the door with the lock button
depressed, the door will remain locked.
Power Door Locks (If equipped)
If your vehicle has power door locks, the
controls to lock the doors are below the inside
door handles on each door. When you close the
doors after you set the door locks, the doors
remain locked. If the power mechanism ever
fails, the manual door locks will override the
power controls.
NOTE:
Vehicles equipped with power locks
have a safety feature which allows you
to unlock one or both front doors from
either door key lock cylinder. To
unlock the driver’s or passenger door
only, insert the key in the door lock
cylinder and turn to the left
(counterclockwise) to the first position.
To unlock the other door at the same
time, simply continue turning the key
to the left to the second position. Both
doors are locked by turning the key to
the right (clockwise).
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст