Ford Probe (1997 year). Manual — part 7
33
❑
Different manufacturers of compact discs may
produce discs with different dimensions or
tolerances, some of which may not be within
industry standards or in accordance with the
CD format. Because of this, a new disc that is
free of dust and scratches could be defective
and may not play on your Ford Compact
Disc Player.
If play does not begin after the CD button is
pushed:
❑
The radio is not on.
❑
The unit is in the stop mode.
❑
Moisture may have condensed on the lenses
within the unit. If this occurs, remove the
disc and wait approximately an hour until the
moisture evaporates.
If the sound skips:
❑
Badly scratched discs or extremely rough
roads will cause the sound to skip. Skipping
will not damage the disc player or scratch the
discs.
34
Electronic Stereo and Stereo
Cassette Radios
Electronic Stereo Radio
35
Electronic Stereo Radio with Cassette
36
Using the Controls on Your New Radio
How to turn the radio on and adjust the
volume
Press the “POWER” button to turn the radio on.
Press it again to turn it off.
Press the right (+) side of the “VOLUME”
button to increase the volume. Press the left (
S
)
side of the button to decrease the volume.
Illuminated bars in the display show the relative
volume level.
NOTE:
If the volume level is set above a
certain listening level when the
ignition switch is turned off, when the
ignition switch is turned back on, the
volume will come back to a “nominal”
listening level. However, if the radio
power is turned off, the volume will
remain in the position it was set at
when radio power was switched off.
Selecting the AM or FM frequency band
Push the “AM/FM” button to select the desired
frequency band. Pushing the button more than
once will alternate between AM, FM1 and FM2.
These functions are used with the station
memory buttons described under
How to tune
radio stations
.
How to tune radio stations (Stereo Radio)
There are three ways for you to tune in to a
particular station. You can manually locate the
station by using the “TUNE” button, “SEEK” the
station or select the station by using the memory
preset buttons, which you can set to any desired
frequency.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст