Ford Aerostar (1997 year). Manual — part 11
41
❑
Adjusting speaker fader
Fade control allows you to adjust the sound
distribution between the front and rear
speakers. Push the “AUDIO” button
repeatedly until the display reads “FADE.”
Push the “+” side of the “VOL” button to
shift the sound to the front speakers, and
push the “-” side to shift the sound to the
rear speakers.
NOTE:
Illuminated bars in the display show
relative levels of bass and treble and
positions of speaker balance and fader
functions after adjustments are made,
then revert to volume level set.
Using the Controls of Your Cassette Tape
Player (If equipped)
How to insert a tape
Your cassette tape player is equipped with
power loading. Once you insert a tape and push
slightly (with the
open edge to the right
), the
loading mechanism draws the tape the rest of
the way in and play will begin after a
momentary tape tightening process. Display
indicates “M” (for metal/CrO
2
) while tape is
playing.
NOTE:
A cassette tape can be loaded with the
ignition on whether or not the radio
power is on.
42
How to locate a desired track on the tape
There are four ways to quickly locate a desired
selection on the tape. You can use the fast
forward, rewind, “SEEK” or “SCAN” function.
Following are brief descriptions of each.
❑
Fast forwarding the tape
To fast forward the tape, press the “FF”
button. The radio will automatically begin
playing until fast forward is manually
stopped. At the end of the tape, the direction
automatically reverses and plays the other
side of the tape.
❑
Rewinding the tape
To rewind the tape, press the “REW” button.
The radio will automatically begin playing
until rewind is manually stopped or the
beginning of the tape is reached.
❑
Using the “SEEK” function with your cassette
tape player
While in the tape mode, push the right
a
side of the “SEEK” button to seek forward to
the next selection on the tape. Push the left
b
side to seek the previous tape selection.
NOTE:
If you want to restart a currently
playing tape selection, press the left
b
side of the “SEEK” button after
approximately three seconds into the
current selection.
43
Whirling sprockets in the display
l
indicate
the direction of tape travel.
❑
Using the “SCAN” function with your
cassette tape player
Press the “SCAN/TUNE” button to enter the
scan mode (display indicates “SCN”).
Pushing the right
a
side of the “SEEK”
button will begin the forward scan mode on
the tape currently playing, stopping on each
tape selection for approximately an
eight-second sampling.
Pushing the left
b
side of the “SEEK”
button will begin the reverse scan mode,
stopping on each previous tape selection for
approximately an eight-second sampling.
While scanning, the display indicates whirling
sprockets plus an “S”
m
.
To stop the scan mode on the presently
sampled tape selection, press the
“SCAN/TUNE” button again.
❑
How to change the side of the tape being
played
The alternate track of the tape can be selected
anytime by pressing the “PLAY/PROG”
button.
How to eject the tape
To stop the tape and eject the cassette, press the
“EJCT” button. The radio will resume playing if
the radio power is on. The tape cartridge can be
ejected with radio power (and/or ignition) on or
off.
44
How to store the tape
Press the “AM/FM” button to stop the tape
player and resume radio play. The cassette will
be stored in the tape player and the
X
symbol
in the display will be lit until you push the
“PLAY PROG” button to resume tape play. Fast
forward and fast rewind can be used while the
tape is in storage mode without interrupting
radio play.
Using the Dolby
H
B noise reduction feature
NOTE:
Noise reduction system manufactured
under license from Dolby Labs
Licensing Corporation. “Dolby” and
double-D symbol are trademarks of
Dolby Laboratories Licensing
Corporation.
Push the
k
button to activate. When on, the
k
symbol above the button will be lit.
Clock Operation
How to view the clock mode
Press the “CLOCK” button to alternate the
frequency and time in the display. In the clock
mode, pressing any radio function will
automatically display the radio frequency for
approximately ten seconds before changing back
to the clock mode.
How to set the clock
1.
Turn the radio on.
2.
Press and hold in the “CLOCK” button.
Press the “SEEK” button left (
b
) to advance
the hours and right (
a
) to advance the
minutes.
NOTE:
The clock displays 12-hour time with
no AM/PM indications.
Большое спасибо!
Ваше мнение очень важно для нас.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст