Ford Fiesta (2011 year). Manual — part 146

Installation

1. NOTE: Before resistance spot welding of body

panels with a total panel thickness of 3 mm and
greater, the manufacturer's welding equipment
instructions and sub-section 501-25 must be
followed.

Refer to: Tools and Equipment for Body Repairs

(501-25 Body Repairs - General Information,
Description and Operation).

2. NOTE: Sealer or adhesive must not be applied

in welding zones. Areas which were bonded or
sealed needs to be thoroughly sealed
afterwards.

Refer to: Sealer, Underbody Protection Material

General Information, Description and
Operation).

3.

General Equipment: Locking Pliers
General Equipment: Spot weld drill Bit

•

E111749

6 mm

4.

General Equipment: Locking Pliers

•

E111750

5.

G1080222en

501-30-

25

Rear End Sheet Metal Repairs

501-30-

25

REMOVAL AND INSTALLATION

and Adhesives

(501-25 Body Repairs -

201

E111751

6.

General Equipment: Metal Inert Gas (MIG)

Welding Equipment

•

E111752

G1080222en

501-30-

26

Rear End Sheet Metal Repairs

501-30-

26

REMOVAL AND INSTALLATION

201

7.

General Equipment: Metal Inert Gas (MIG)

•

Welding Equipment

E111753

8.

Puddle weld 3 panel layer.

General Equipment: Metal Inert Gas (MIG)

Welding Equipment

•

G1080222en

501-30-

27

Rear End Sheet Metal Repairs

501-30-

27

REMOVAL AND INSTALLATION

201

E111754

9.

Puddle weld 3 panel layer.

General Equipment: Metal Inert Gas (MIG)

Welding Equipment

•

E111755

10. • Liftgate

• Rear Bumper

Refer to: Rear Bumper Cover

(501-19

Bumpers, Removal and Installation).

Refer to: Loadspace Trim Panel - 5-Door

(501-05 Interior Trim and Ornamentation,
Removal and Installation).

Refer to: C-Pillar Trim Panel - 5-Door

(501-05

Interior Trim and Ornamentation, Removal
and Installation).

Refer to: Quarter Panel LH - 5-Door

(501-30

Rear End Sheet Metal Repairs, Removal
and Installation).

• Reposition the carpeting and the wiring

harness away from the working area.

G1080222en

501-30-

28

Rear End Sheet Metal Repairs

501-30-

28

REMOVAL AND INSTALLATION

201