Ford Fiesta (2011 year). Manual — part 147
Water Drain Panel — 4-Door
General Equipment
Metal Inert Gas (MIG) Welding Equipment
General Equipment
Resistance Spotwelding Equipment
Spot weld drill Bit
Removal
1.
Liftgate
•
• Rear Bumper
Rear End Sheet Metal Repairs, Removal
and Installation).
Refer to: C-Pillar Trim Panel - 4-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: Rear Bumper Cover - 4-Door
(501-19 Bumpers, Removal and
Installation).
Refer to: Loadspace Trim Panel - 4-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
• Reposition the carpeting and the wiring
harness away from the working area.
2.
General Equipment: Spot weld drill Bit
•
E113752
3.
General Equipment: Spot weld drill Bit
•
E114268
4.
General Equipment: Spot weld drill Bit
•
E113753
Installation
1. NOTE: Before resistance spot welding of body
panels with a total panel thickness of 3 mm and
greater, the manufacturer's welding equipment
G1133610en
501-30-
29
Rear End Sheet Metal Repairs
501-30-
29
REMOVAL AND INSTALLATION
201
Refer to: Quarter Panel LH - 4-Door
(501-30
instructions and sub-section 501-25 must be
followed.
(501-25 Body Repairs - General Information,
Description and Operation).
2. NOTE: Sealer or adhesive must not be applied
in welding zones. Areas which were bonded or
sealed needs to be thoroughly sealed
afterwards.
General Information, Description and
Operation).
3.
General Equipment: Spot weld drill Bit
•
6 mm
E113754
4.
General Equipment: Resistance Spotwelding
Equipment
•
E113755
5.
General Equipment: Resistance Spotwelding
Equipment
•
E114269
6.
General Equipment: Metal Inert Gas (MIG)
Welding Equipment
•
E113756
G1133610en
501-30-
30
Rear End Sheet Metal Repairs
501-30-
30
REMOVAL AND INSTALLATION
and Adhesives (501-25 Body Repairs -
201
Refer to: Tools and Equipment for Body Repairs
Refer to: Sealer, Underbody Protection Material
7. • Liftgate
• Rear Bumper
Refer to: Quarter Panel LH - 4-Door
(501-30
Rear End Sheet Metal Repairs, Removal
and Installation).
Refer to: C-Pillar Trim Panel - 4-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: Rear Bumper Cover - 4-Door
(501-19 Bumpers, Removal and
Installation).
Refer to: Loadspace Trim Panel - 4-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
G1133610en
501-30-
31
Rear End Sheet Metal Repairs
501-30-
31
REMOVAL AND INSTALLATION
201
Water Drain Panel Reinforcement
General Equipment
Air Body Saw
Locking Pliers
General Equipment
Metal Inert Gas (MIG) Welding Equipment
Spot weld drill Bit
Removal
1.
Refer to: Back Panel and Reinforcement -
5-Door
(501-30 Rear End Sheet Metal
Repairs, Removal and Installation).
Refer to: Water Drain Panel
(501-30 Rear
End Sheet Metal Repairs, Removal and
Installation).
Refer to: Quarter Panel LH - 5-Door
(501-30
Rear End Sheet Metal Repairs, Removal
and Installation).
•
• Reposition the carpeting and the wiring
harness away from the working area.
2.
General Equipment: Spot weld drill Bit
•
E111764
3.
G1080223en
501-30-
32
Rear End Sheet Metal Repairs
501-30-
32
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст