Ford Fiesta (2011 year). Manual — part 37
5. On both sides.
E112169
6.
E107069
7.
E112171
8.
CAUTION: If the original window glass
is to be installed, take care not to
damage the electrical connectors and
the weatherstrip (if equipped).
Use appropriate cutting wire with suitable
handles to cut the glass adhesive. Use adhesive
tape and laminated card to prevent paint
damages. Use suction cups to handle the
window glass.
General Equipment: Laminated Card
General Equipment: Adhesive Tape
E112172
x2
G1155354en
501-11-
30
Glass, Frames and Mechanisms
501-11-
30
REMOVAL AND INSTALLATION
201
9. NOTE: Note the position of the components
before removal.
E112173
Installation
1. NOTE: Minimum 1 mm bead thickness.
NOTE: Make sure that the mating faces are
clean and free of foreign material.
NOTE: Touching the adhesive surface will
impair rebonding.
Prepare the windshield glass, windshield glass
flange and trimmed PU adhesive in accordance
with the instructions supplied with the PU
adhesive kit.
General Equipment: Knife
General Equipment: Hot Air Gun
E112174
2. Apply the primer supplied with the glass
adhesive kit.
E114261
3. NOTE: Make sure that the component is
installed to the position noted before removal.
E112173
4. NOTE: This step is only necessary if the original
component is to be reused.
NOTE: Minimum 1 mm bead thickness.
NOTE: Make sure that the mating faces are
clean and free of foreign material.
NOTE: Touching the adhesive surface will
impair rebonding.
General Equipment: Knife
General Equipment: Hot Air Gun
E112194
G1155354en
501-11-
31
Glass, Frames and Mechanisms
501-11-
31
REMOVAL AND INSTALLATION
201
5. Apply the primer supplied with the glass
adhesive kit.
E114262
6. NOTE: Discard the first 100 mm of adhesive as
this may have a reduced working time.
NOTE: Make sure that any breakage in the
continuous bead of adhesive is overlapped by
20 mm.
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
E112175
7.
CAUTION: During the curing time of the
polyurethane (PU) adhesive, the door
windows must be left open.
Use suction cups to handle the window glass.
General Equipment: Adhesive Tape
E112176
x2
G1155354en
501-11-
32
Glass, Frames and Mechanisms
501-11-
32
REMOVAL AND INSTALLATION
201
8. If the ambient temperature falls below 10°C,
apply warm air (25°C) continuously for 15
minutes.
General Equipment: Hot Air Gun
E112177
50 mm
9. On both sides.
E112169
10. On both sides.
E106826
11. On both sides.
G1155354en
501-11-
33
Glass, Frames and Mechanisms
501-11-
33
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст