Ford Fiesta (2011 year). Manual — part 35
Installation
1.
NOTE: Minimum 1 mm bead thickness.
General Equipment: Knife
1.
2. NOTE: Make sure that the mating faces are
clean and free of foreign material.
3. NOTE: Touching the adhesive surface will
impair rebonding.
Prepare the rear quarter window glass, rear
quarter window glass flange and trimmed PU
adhesive in accordance with the instructions
supplied with the glass adhesive kit.
E114059
1
2
3-door
2. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
E119628
G1226512en
501-11-
22
Glass, Frames and Mechanisms
501-11-
22
REMOVAL AND INSTALLATION
201
3. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
E119650
4. NOTE: Discard the first 100 mm of adhesive as
this may have a reduced working time.
NOTE: Make sure that any breakage in the
continuous bead of adhesive is overlapped by
20 mm.
General Equipment: Direct Glazing
Removal/Replacement Equipment
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
Material: Windscreen Adhesive Kit - 1
Component (WSK-M11P57-A3 /
7U7J-T03863-AA)
E119651
5.
Press firmly and evenly into position.
General Equipment: Direct Glazing
Removal/Replacement Equipment
•
•
CAUTION: During the curing time of
the polyurethane (PU) adhesive, the
door windows must be left open.
Using tape, secure the rear quarter window
glass in the correct position until the PU
adhesive has cured.
General Equipment: Adhesive Tape
G1226512en
501-11-
23
Glass, Frames and Mechanisms
501-11-
23
REMOVAL AND INSTALLATION
201
E119649
5-door
6. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
G1226512en
501-11-
24
Glass, Frames and Mechanisms
501-11-
24
REMOVAL AND INSTALLATION
201
E119657
7. Apply the activator/ primer in accordance with
the instructions supplied with the glass adhesive
kit.
E119655
8. NOTE: Discard the first 100 mm of adhesive as
this may have a reduced working time.
NOTE: Make sure that any breakage in the
continuous bead of adhesive is overlapped by
20 mm.
General Equipment: Direct Glazing
Removal/Replacement Equipment
Material: Windshield Adhesive Kit
(WSS-M11P57-A5)
Material: Windscreen Adhesive Kit - 1
Component (WSK-M11P57-A3 /
7U7J-T03863-AA)
E119656
G1226512en
501-11-
25
Glass, Frames and Mechanisms
501-11-
25
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст