Ford Fiesta (2011 year). Manual — part 154

E112425

4.

Cut all panel layers.

General Equipment: Air Body Saw
General Equipment: Spot weld drill Bit

•

E112426

G1133604en

501-30-

57

Rear End Sheet Metal Repairs

501-30-

57

REMOVAL AND INSTALLATION

201

5.

Do not cut in panel below.

General Equipment: Air Body Saw

•

E112427

6.

General Equipment: Hot Air Gun

•

E112428

170

7.

Do not cut in panel below.

General Equipment: Air Body Saw
General Equipment: Spot weld drill Bit

•

G1133604en

501-30-

58

Rear End Sheet Metal Repairs

501-30-

58

REMOVAL AND INSTALLATION

201

E112429

30 mm

Installation

1. NOTE: Before resistance spot welding of body

panels with a total panel thickness of 3 mm and
greater, the manufacturer's welding equipment
instructions and sub-section 501-25 must be
followed.

Refer to: Tools and Equipment for Body Repairs

(501-25 Body Repairs - General Information,
Description and Operation).

2. NOTE: Sealer or adhesive must not be applied

in welding zones. Areas which were bonded or

sealed needs to be thoroughly sealed
afterwards.

Refer to: Sealer, Underbody Protection Material

and Adhesives

(501-25 Body Repairs -

General Information, Description and
Operation).

3.

Continuous MIG weld seam on C-Pillar.

General Equipment: Metal Inert Gas (MIG)

Welding Equipment

•

• Puddle weld.

General Equipment: Metal Inert Gas (MIG)

Welding Equipment

G1133604en

501-30-

59

Rear End Sheet Metal Repairs

501-30-

59

REMOVAL AND INSTALLATION

201

E112430

4.

General Equipment: Resistance Spotwelding

Equipment

•

E112431

G1133604en

501-30-

60

Rear End Sheet Metal Repairs

501-30-

60

REMOVAL AND INSTALLATION

201