Ford Fiesta (2011 year). Manual — part 156
E113769
Installation
1. NOTE: Before resistance spot welding of body
panels with a total panel thickness of 3 mm and
greater, the manufacturer's welding equipment
instructions and sub-section 501-25 must be
followed.
Refer to: Tools and Equipment for Body Repairs
(501-25 Body Repairs - General Information,
Description and Operation).
2. NOTE: Sealer or adhesive must not be applied
in welding zones. Areas which were bonded or
sealed needs to be thoroughly sealed
afterwards.
Refer to: Sealer, Underbody Protection Material
General Information, Description and
Operation).
3.
General Equipment: Resistance Spotwelding
Equipment
•
E113770
4.
General Equipment: Resistance Spotwelding
Equipment
•
G1133612en
501-30-
65
Rear End Sheet Metal Repairs
501-30-
65
REMOVAL AND INSTALLATION
and Adhesives
(501-25 Body Repairs -
201
E113771
5.
General Equipment: Resistance Spotwelding
Equipment
•
E113772
6. • Liftgate
• Rear Bumper
Refer to: Rear Bumper Cover - 4-Door
(501-19 Bumpers, Removal and
Installation).
•
Refer to: C-Pillar Trim Panel - 4-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
Refer to: Loadspace Trim Panel - 4-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
G1133612en
501-30-
66
Rear End Sheet Metal Repairs
501-30-
66
REMOVAL AND INSTALLATION
201
Back Panel and Reinforcement — 5-Door
General Equipment
6 mm Drill Bit
General Equipment
Metal Inert Gas (MIG) Welding Equipment
Spot weld drill Bit
Removal
1.
Liftgate
•
• Rear Bumper
Refer to: Rear Bumper Cover
(501-19
Bumpers, Removal and Installation).
•
Refer to: Loadspace Trim Panel - 5-Door
(501-05 Interior Trim and Ornamentation,
Removal and Installation).
Refer to: C-Pillar Trim Panel - 5-Door
(501-05
Interior Trim and Ornamentation, Removal
and Installation).
• Reposition the carpeting and the wiring
harness away from the working area.
2.
General Equipment: Spot weld drill Bit
•
E108815
3.
General Equipment: Spot weld drill Bit
•
G1133613en
501-30-
67
Rear End Sheet Metal Repairs
501-30-
67
REMOVAL AND INSTALLATION
201
E108816
4.
General Equipment: Spot weld drill Bit
•
E108817
G1133613en
501-30-
68
Rear End Sheet Metal Repairs
501-30-
68
REMOVAL AND INSTALLATION
201
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст