Chery B14. Manual — part 13
8.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . .. 72
8.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . . . ... 73
9 Disassembly/assembly of headlamp combined. . . . . . . . . . . . . . . 73
switch, wiper switch, ignition switch, coil cable . . . . . . . . . . . . . . . 73
(Please refer to disassembly/assembly of. . . . . . . . . . . . . . . . . . 73
II. Disassembly of Instrument Panel . . . . . . . . . . . . . . . . . . . . . 74
1 Disassembly/assembly of instrument panel . . . . . . . . . . . . . . . .. 74
1.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . .. 74
1.2 Assembly steps of instrument panel. . . . . . . . . . . . . . . ... 76
2 Disassembly of instrument cross beam. . . . . . . . . . . . . . . . . . 77
2.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . .. 77
2.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . . . ... 80
Chapter Nine AC System. . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
I. System Composition. . . . . . . . . . . . . . . . . . . . . . . . . . . 81
II. Disassembly of evaporator assembly . . . . . . . . . . . . . . . . . . . .. 81
1 Preparation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
2 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . . . . . 81
3 Installation of evaporator assembly . . . . . . . . . . . . . . . . . . .. 83
4 Disassembly/assembly of interior evaporator . . . . . . . . . . . . . . ... 83
4.1 Blower replacement . . . . . . . . . . . . . . . . . . . . . ... 83
4.1.1 Disassembly steps . . . . . . . . . . . . . . . . . . . ... 83
4.1.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . 83
5 Disassembly/assembly of blower speeder module. . . . . . . . . . . . . 83
5.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . .. 83
5.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . . . ... 84
6 Disassembly/assembly of heating water tank . . . . . . . . . . . . . . ... 84
6.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . .. 84
6.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . . . ... 86
7 Disassembly/assembly of mode ventilator. . . . . . . . . . . . . . . . 86
motor and related mechanism . . . . . . . . . . . . . . . . . . . . . . . 86
7.1 Disassembly/assembly steps . . . . . . . . . . . . . . . . . . .. 86
7.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . . . ... 87
8 Disassembly/assembly of mixing ventilator motor and related mechanism . . . . 87
8.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . .. 87
8.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . . . ... 88
9 Disassembly/assembly of inside/outside circulation ventilator motor and related
mechanism . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 88
9.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . .. 88
9.2 Assembly steps. . . . . . . . . . . . . . . . . . . . . . . ... 88
10 Disassembly/assembly of evaporator . . . . . . . . . . . . . . . . . .. 88
10.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . 88
10.2 Assemble evaporator assembly . . . . . . . . . . . . . . . . . 89
11 Disassemble other accessories from evaporator. . . . . . . . . . . . . .. 89
11.1 Disassembly steps . . . . . . . . . . . . . . . . . . . . . . 89
11.2 Assemble of other accessories for evaporator . . . . . . . . . . . .. 90
III. Trouble shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 90
Chapter Ten Body Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
I. Beam Dimension . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 94
II. Body assembly dimension. . . . . . . . . . . . . . . . . . . . . . . ... 95
1 Front view . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
2 Rear view . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
3 Left side view-1. . . . . . . . . . . . . . . . . . . . . . . . . ... 105
4 Left side view-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
III.Engine Compartment Dimension. . . . . . . . . . . . . . . . . . . . .. 117
IV. Windscreen Dimension . . . . . . . . . . . . . . . . . . . . . . . . 118
V. Dimension of All the Opening. . . . . . . . . . . . . . . . . . . . . ... 119
Chapter One Engine Hood And Luggage Compartment
I. Disassembly and assembly of engine hood
1 Preparation
Tool: flat head screwdriver, pliers, wrench
2 Note
2.1 Pay attention to use correct force during disassembly and assembly , and it is not allowed to
operate with too big force.
2.2 Pay attention to avoid scoring the surface during the inner trimming parts disassembly and
assembly.
3 Disassembly/assembly of engine hood accessories
3.1 Disassembly steps
3.1.1 Take off the snap clips(19 pieces) by screwdriver from
heat insulator, and take off the engine heat insulator.
3.1.2 Take off the hose of washing liquid.
3.1.3 Take off two water nozzle clips from engine hood, Push
the nozzles under the hood and get out of the nozzles front
outside.
3.2 Assembly steps
The installing steps are reverse to those for removal.
4 Disassembly and adjustment of the engine hood assembly
Tool: No. 13 spanner
4.1 Take off four adjusting bolts from engine hood.
And disassemble the engine hood.
At the same time, through unscrewing four adjusting bolts,
move and adjust the position of engine hood.
4.2 Assembly of front engine hood assembly:
The installing steps are reverse to those for removal.
Installation torque: 29±3Nm
5 Disassembly and assembly of air intake grille assembly
Tool: No. 10 spanner
5.1 Disassembly steps
5.1.1 Take off four fixing bolts by spanner from air intake
grille assembly, see the chart.
5.1.2 Take off air intake grille.
Note: take off the air intake grille horizontally to avoid to
damage the clips on the grille.
5.2 Assembly of air intake grille
The installing steps are reverse to those for removal.
Installation torque: 5±0.5Nm
6 Adjustment and assembly of the engine hood lock
Tool: No.10 spanner
6.1 Disassembly steps
6.1.1 Disassemble the front engine hood lock by unscrewing
these three centering bolts from engine hood.
And also the lock position can be adjusted by these three
centering bolts.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст