Chery Tiggo 5 (T21). Manual — part 265
24–
3
24
GENERAL INFORMATION
Precautions
Use tires only with the standard specification and type, because they have excellent reliability and skid
resistance. Non-standard tire may lead to vehicle malfunction, causing accident or even serious injury and
death.
Contact surface of rim and tire should be cleaned before installing a new tire.
When installing the wheel bolts, firstly, pre-tighten the bolts by hand, and then tighten them to the specified
torque with a torque wrench.
Do not apply grease to the wheel bolts.
Some bad driving habits will shorten the life of tire:
- Rapid acceleration
- Depress brake pedal suddenly and firmly
- High-speed driving
- Turn at excessive speed
- Striking curbs or other obstacles
- Tire pressure is too high or too low when driving vehicle
Tire Identification
Letter and number code of tire type, size, load index and
speed level are stamped on the side wall of tire as shown
in the illustration.
225/65R
17 1
02
H
RT21240010
225/65 R17 102H
24–
4
24
Specifications
Torque Specification
Tire Type
Rim Type
Tire Pressure Specifications of Cold Tire
Description
Torque (N·m)
Wheel Mounting Bolt
110 ± 10
Description
Parameter
Tire Type
225/65 R17 102H
Description
Parameter
Rim Type
17 × 7 J
Description
Pressure (kPa)
Front Tire (Unloaded)
230
Rear Tire (Unloaded)
230
Spare Tire
250
24–
5
24
DIAGNOSIS & TESTING
Problem Symptoms Table
HINT:
Use the table below to help determine the cause of the problem symptoms. Check each suspected area in
sequence. Repair or replace the faulty components, or adjust as necessary.
Inspection
1. Check if tires are damaged or scratched as shown in the
illustration.
2. Check if rims are damaged or scratched as shown in the
illustration.
Symptom
Suspected Area
See page
Wear on one side of tire
Wheel alignment (wrong)
Wear on both sides of tire
Tire pressure (insufficient)
Tire center wear
Tire pressure (excessive)
Serrated wear
Wheel alignment (wrong)
Severe wear of some area of tire
Brake (too hard)
-
Scratches on side wall of tire
Sharp objects on road (scratched)
Excessive tire noise
Tire pressure (incorrect)
Tire (worn)
CAUTION
Be sure to refer to the instruction when installing non-standard tires and rims.
Use tires only with the standard specification and type.
RT21240020
24–
6
24
3. Check if tires are worn abnormally as shown in the
illustration.
4. Check the tread wear indicators (arrow) as shown in the
illustration. When tires are worn to the indicating mark,
replace them.
5. Use tire pressure gauge to check if pressures of all tires (including spare tire) are normal. Inflate tires to
specified tire pressure as necessary.
6. Check the air cock for leakage.
Center Wear
Wear on Both Sides
Serrated Wear
Wear on One Side
RT21240030
RT21240040
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст