Chery Tiggo. Manual — part 447
GRILLE
Grille
Removal & Installation
1. Open the hood.
2. Remove the radiator grille mounting bolts (1).
3. Remove the radiator grille.
4. Installation is in the reverse order of removal.
LTSM150105
15
HOOD
Hood
Removal & Installation
1. Remove the hood mounting bolts (1) and the stay
bars (2).
(Tighten:
Hood mounting bolts to 23 ± 2 N·m)
N·m)
2. Loosen the windshield washer hose.
3. Remove the hood.
4. Installation is in the reverse order of removal.
Hood
Adjustment
1. Adjust the hood gap with a spacer gauge.
• The gap between the hood and the fender should be 5 ± 0.5 mm
• The overall levelness when measured with a magnet should be 0-0.5 mm
2. Install the nuts (Part Number: Q1400820, 2 pcs both upper and lower) into the body for 2-3 turns, tighten with
pneumatic wrench. Torque: 30 ± 4 N·m.
Check for the following after repair:
• Whether the bolts and nuts are assembled properly
• Whether the bolts and nuts are properly tightened
• Whether the gap between the hood and the fender are within specifications
• Whether the horizontal alignment of the front edge of the fenders is within specifications (0-0.5 mm)
LTSM150107
Hood Release Cable
Removal & Installation
1. Remove the left lower trim of the instrument panel (See Instrument Panel Removal & Installation in Section 15
Body & Accessories).
2. Remove the lining of the left fender (See Fender Removal & Installation in Section 15 Body & Accessories).
3. Remove the radiator support (See Radiator Support Removal & Installation in Section 15 Body & Accessories).
4. Loosen the hood release cable.
5. Remove the hood release cable.
6. Installation is in the reverse order of removal.
HOOD
LTSM150108
15
LUGGAGE RACK
Luggage Rack
Removal & Installation
1. Remove the luggage rack bolt cover and then
remove the mounting bolts (1).
2. Remove the luggage rack.
3. Installation is in the reverse order of removal.
LTSM150104
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст