Chery Tiggo. Manual — part 446
High Mounted Stop Lamp
Removal & Installation
1. Remove the high mounted stop lamp cover (1).
2. Remove the high mounted stop lamp mounting
screws (2).
3. Disconnect the electrical connector (3) of the high
mounted stop lamp.
4. Remove the high mounted stop lamp assembly.
5. Replace the bulb with a new bulb as needed.
6. Installation is in the reverse order of removal.
License Plate Lamp
Removal & Installation
1. Press the release tab with a flat screwdriver,
remove the license plate lamp.
2. Disconnect the license plate lamp electrical connector.
EXTERIOR LAMPS
LTSM150124
LTSM150040
15
3. Replace the bulb with a new bulb (1) as needed.
4. Installation is in the reverse order of removal.
EXTERIOR LAMPS
LTSM150145
FENDER
Front Fender
Removal & Installation
1. Remove the mounting bolts (1) as shown.
2. Remove the front fender.
3. Installation is in the reverse order of removal.
LTSM150083
15
FUEL DOOR
Fuel Door
Removal & Installation
1. Open the fuel door.
2. Remove the two fuel door retaining bolts (1).
(Tighten: Fuel door bolts to 5 N·m)
3. Remove the fuel door.
4. Installation is in the reverse order of removal.
LTSM150128
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст