Chery Tiggo. Manual — part 62
Oil Pump Clearance Specifications
− Driving Gear: 0.08-0.14 mm
− Driven Gear: 0.06-0.12 mm
Oil Strainer
Removal & Installation
1. Raise and support the vehicle.
2. Remove the oil pan (See Oil Pan Removal & Installation in Section 02 Engine).
3. Remove the oil strainer retaining bolts.
(Tighten: Oil strainer bolts to 18 N·m)
4. Carefully remove the oil strainer.
5. Installation is in the reverse order of removal.
Installation Notes:
• Install new O-rings on the oil strainer pipe.
ON-VEHICLE SERVICE
LTSM020149
ENGINE UNIT REPAIR
Engine Block
Specifications
Torque Specifications
DESCRIPTION
TORQUE (N·m)
Connecting Rod Cap Nuts
1st Step: Tighten the nuts to 20 N·m
2nd Step: Tighten the nuts an additional 90°-100°
Main Bearing Cap Bolts
1st Step: Tighten the bolts to 25 N·m
2nd Step: Tighten the bolts an additional 90°-100°
Clearance Specifications
DESCRIPTION
SPECIFICATION (mm)
Surface Distortion Limit
0.15
Cylinder Diameter Standard
86.50 - 86.53
Out-Of-Round
< 0.008
Taper
< 0.01
02
Disassembly
1. Remove the oil pan.
2. Remove the oil strainer.
3. For each connecting rod/piston assembly to be removed, rotate the crankshaft to the bottom dead center position
for each cylinder.
NOTE :
Before removing the connecting rod/piston assembly, check the connecting rod side clearance.
1 - Cylinder Block
2 - Crankshaft Thrust Bearing
3 - Upper Crankshaft Bearing
4 - Crankshaft
5 - Lower Crankshaft Bearing
6 - Bearing Cap
7 - Bearing Cap Bolt
ENGINE UNIT REPAIR
LTSM020124
4. Remove the connecting rod retaining bolts.
5. Remove the connecting rod bearing cap.
6. Using a hammer handle or similar tool, push the
connecting rod/piston assembly (1) out through the
top of the cylinder block.
7. Remove the connecting rod bearings (See Con-
necting Rod Removal & Installation in Section 02
Engine).
CAUTION: When removing the connecting rod
side bearings, note the installation position.
Keep them in the correct order.
8. Installation is in the reverse order of removal.
ENGINE UNIT REPAIR
BESM020042
BESM020043
BESM020044
BESM020045
02
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст