Chery Tiggo. Manual — part 332
5. Ensure the cushion stopper mark (1) is in line with
the mark on the strut.
6. Install the cushion block and pull the piston rod to the bottom.
7. Align the coil spring on the bottom spring holder (1)
(the end of the spring should be indexed in the
spring pocket).
8. Install the upper spring holder with the index posi-
tion of 180° angle between the punched hole and
the spring strut mounting position (1).
9. Install the upper spacer and bearing.
10. Install the strut rod nut to the strut rod.
UNIT REPAIR
LTSM100019
LTSM100020
LTSM100021
REAR SUSPENSION
GENERAL INFORMATION
10-26
Description
10-26
Operation
10-27
Specifications
10-28
DIAGNOSIS & TESTING
10-29
Vehicle Inspection
10-29
Vibration At High Speed
10-29
ON-VEHICLE SERVICE
10-30
Rear Lower Control Arm
10-30
Removal & Installation
10-30
Rear Upper Control Arm
10-31
Removal & Installation
10-31
Rear Stabilizer Bar Link
10-32
Removal & Installation
10-32
Rear Shock Absorber
10-32
Description
10-32
Operation
10-32
Removal & Installation
10-32
Rear Shock Absorber Inspection
10-33
Rear Coil Spring
10-33
Description
10-33
Operation
10-34
Removal & Installation
10-34
Rear Trailing Arm Assembly
10-35
Removal & Installation
10-35
10
GENERAL INFORMATION
Description
The rear suspension consists of the following components:
LTSM100035
WARNING!
Only frame contact or wheel lift hoisting equipment can be used on this vehicle. It cannot be hoisted using
equipment designed to lift a vehicle by the rear axle. If this type of hoisting equipment is used, damage to rear
suspension components will occur.
CAUTION:
If a rear suspension component becomes bent, damaged or fails, no attempt should be made to
straighten or repair it. Always replace it with a new component.
Operation
The rear suspension utilizes an independent multi-link arm design. This suspension system allows the wheels to
react to road imperfections independent of each other. This independent action offers improved isolation from the
effects of jounce and rebound.
1 - Rear Sub-Frame Assembly
2 - Rear Suspension Upper Rocker Arm Assembly
3 - Rear Spring Pad
4 - Bolt
5 - Nut
6 - Washer
7 - Left Brake Line Bracket
8 - Rear Coil Spring
9 - Left Brake Line Support
10 - Left Rear Trailing Arm Assembly
11 - Left Rear Strut Assembly
12 - Rear Stabilizer Lever Assembly
13 - Rear Suspension Left Lower Rocker Arm Assembly
14 - Left Rear Stabilizer Bar Link
15 - Right Rear Stabilizer Bar Link
16 - Rear Suspension Right Lower Rocker Arm Assembly
17 - Rear Stabilizer Bar
18 - Rubber Support
19 - Rubber Bushing Assembly
20 - Right Rear Strut Assembly
21 - Right Rear Trailing Arm Assembly
22 - Rear Coil Spring
GENERAL INFORMATION
LTSM100035
10
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст