Chery S11 / Chery QQ. Manual — part 59
Chery QQ Service Manual BCM Computer Control System
integration of the antitheft device, power windows and central door lock module. The
system is installed on the left side of the evaporator that is at the lower center of the
central console. When the switch on the remote control device is pressed down, the
central door lock system will enter a security mode with glass window automatically
closed to avoid raining, wind or theft in case the user forgets to lock the windows. This
function will greatly benefit users.
Ⅲ.Function theory of antitheft control system
1. Power
window
①
The main power of the control device is under control of the ignition switch. When
the ignition switch is closed for 60 seconds, it will forbid the glass to rise or drop.
②
The elevator control module controls four glass controllers that can sense whether the
elevating device clamps any person or material. These devices are under protection
by residual current breakers and the leakage limit will change according to the
external voltage changes. Four window controllers have function of consecutive
output of 8-second protection.
③
The safety switch can control whether the right front, left rear and right rear door
switches can operate the corresponding glass elevator.
④
Operation mode: manual elevation, decline, and automatic decline.
Manual decline: pressing time ≥ 300ms
Automatic decline: pressing time ≤ 300ms.
Note: When the glass descends automatically, if the decline switch of the glass controller
is pressed for over 300ms, the glass movement will be turned into the mode of manual
decline; if the elevation switch of the controller is pressed for over 300ms, the glass
movement will be turned into the mode of manual elevation. If the pressing time is no
less than 300ms, the glass movement will stop.
2. Central door lock
①
The left front door independently controls the locking and unlocking of central lock;
②
It can lock and unlock remotely;
③
The central door lock cannot operate simultaneously together with the glass elevator.
- 80 -
Chery QQ Service Manual BCM Computer Control System
The central door lock prevails when these two operations are in conflicts and the glass
elevator stops. When the central door lock completes the glass elevator resumes the
previous task.
3. Remote antitheft function
①
The remote controller has two keys; one is
for setting security mode and the other is to
remove the mode.
②
Security mode: Press the first key on the remote control, then the indicator flashes
once, and the central door lock automatically locks. At the same time the engine is
locked and the LED will flash slowly to indicate the system is on security mode.
When the system is triggered, the turn signal lamp flashes.
③
Removing security mode: Press the second key on the remote control, and then the
indicator flashes twice; simultaneously the lock will automatically unlock and
remove the locking mode of the engine and the LED indicator turns off.
④
Two-stage removing security mode: when the system is triggered, pressing any key
on the remote control will stop the alarm sound. However, the system is still on the
alarm status and the doors locked. If the system continuously receives invading
signals, the alarm will sound again after a short pause. The second key should be
pressed once immediately after the alarm is removed for the first time so as to
remove the alarm completely.
⑤
Secondary antitheft function: when the security mode is removed, the door is not
opened and the ignition switch is not turned on within 30 seconds, the antitheft
device will automatically resume the alarm mode and lock the door.
⑥
Automatic locking/unlocking function: the door will automatically lock five seconds
later when the ignition switch is turned on and automatically unlock the door when
the ignition switch is turned off. If the door is opened once five seconds after the
ignition switch is turned on, the system will not automatically lock to prevent the
driver being locked outside of the car.
⑦
The mainframe is apt to keep the memory of passwords.
⑧
Remote closing the window: when set the security mode remotely, the glass elevator
- 81 -
Chery QQ Service Manual BCM Computer Control System
will automatically work to close the glass windows one by one if the glass window is
not closed.
4. Code setting mode
①
Turn on the ignition switch IGN ON/OFF for two times within 7 second and push
IGN at ON position.
②
LED flashes quickly for 3 seconds;
③
LED will pause 1 second after the above response;
④
When the flash time of LED equals to PIN CODE (PIN CODE =1), set the switch at
IGN OFF;
⑤
When the ignition switch is set at IGN ON, press the first key to set the system;
⑥
Set the switch at IGN OFF;
⑦
When IGN is at OFF position for 10 seconds, it means the system has quit the code
setting mode or you can immediately turn the IGN at ON position to enter
software-switching application.
5. Engine
control
When the ignition switch is set at ST position, the power is supplied through the fuse to
BCM No. 2 Foot. The starting relay is embedded in the BCM computer. When the
antitheft function fails, the starting relay controls operation of the engine.
IV. Inspection and Repair of Antitheft Controller System
1. Check remote control
1) When you press down Unlock or Lock keys, central door lock fails to work. Firstly,
remote control should be checked whether LED indicator light flashes or not when you
press the button. If it flashes, something is wrong with antitheft computer, which will be
then maintained or replaced. Otherwise, something is wrong with remote control. Then
the battery should be checked. If there is power in the battery, remote control fails and
shall be replaced. If out of power, the battery should be replaced.
2) Replace the battery in remote control. Unclench remote control first, and then
change battery as shown in the figure below.
- 82 -
Chery QQ Service Manual BCM Computer Control System
Note: Only the battery with regulated voltage
(+3V) is available. Put in a proper manner
according to positive and negative marks.
2. Check BCM computer
Terminal check of BCM computer is tabulated as below.
Terminal
No.
Terminal Notes
A1
Signal for elevation of left front power window
A2
Ignition switch power supply +12V(F14)20A
A3
Field coil of starter’s electromagnetic switch
A4
Switch signal of central door lock (left front)
A5
Battery power signal +12V(F13)30A
A6
Battery power signal +12V(F13)30A
A7
Battery power signal +12V(F13)30A
A8 Grounding
A9 Grounding
A10
Antitheft alarm signal
A11
Control signal for motor lock of central door lock
A12
Control signal for motor unlock of central control door lock
A13
Antitheft indication signal to right turn indicator
A14
Signal for decline of left front power window
A15
Signal for elevation of right front power window
A16
Signal for decline of right front power window
A17
Signal for elevation of right rear power window
A18
Signal for decline of right rear power window
A19
Battery power signal +12V(F13)30A
- 83 -
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст