Chery S11 / Chery QQ. Manual — part 21
Chery QQ Service Manual Transmission System
-105-
(6)Spread 30-40 g of SUZUKI high class grease H on the surface of the holding.
(7). Put the holding into the bell-mouthed, and then put the snap ring in the snap
ring slot.
Caution: snap ring hatch (A) can not aim at the ball.
(8)Fill in 23-35g of SUZUKI high class grease H, put the boot on the bell-mouth,
Then install boot on bell-mouth。
After installing the boot, insert a driven screw into bell-mouthed boot, send air
into boot.
Chery QQ Service Manual Transmission System
-106-
9. Fix the boot on the bell-mouthed. Adjust the measure (A) and (B) to accord
with the fig. Below.
Left drive shaft
Right drive shaft
Differential
side
lubricate
lubricate
lubricate
Wheel side
(2)install output shaft and bearing race.
Install the output shaft according to the reverse order and pay attention to the
followings.
When installing the bearing race snap ring, be sure the snap ring has been
fixed tightly in the central bearing race snap ring slot; keep the left oil seal in the right
direction shown in the fig. below.
1. Snap ring
2. Central bearing
race
1.Left oil seal
2.Lubricate
Fix the snap ring tightly in the snap ring slot.
When install the right oil seal, keep the right direction shown in the fig. below.
Chery QQ Service Manual Transmission System
-107-
1.Snap ring
2.Output shaft
1.Right oil
seal
2
,
L b i t
VI, Installation
Install the propeller shaft assembly according to the reverse order, clean the front
wheel bearing oil seal and spread lubricant.
First install the end of wheel universal joint on the steering and then install the
universal joint on the end of differential.
Manual transaxles drain plug seal。
Fill up the transaxles.
Caution:
Do not hurt oil seal and boot.
Do not hammer the universal joint boot to adjust, use the hands to insert the
universal joint.
Be sure the differential universal joint has been inserted to the right position and
the snap ring has been placed on the original position.
1. Front wheel bearing seal
2. Suspension
arm
Chery QQ Service Manual Transmission System
-108-
V. Recommended Value of torque
Torque
Screw down parts
N·m kg·m 1b-ft
Drain plug
Manual
transaxles
25-30 2.5-3.0
18.5-21.5
Automatic
transaxles
18-23 1.8-2.3
13.5-16.5
Oil level, refill plug
Manual
transaxles
36-54 3.6-5.4
26.5-39.0
Ball joint bolt and nut
50-70
5.0-7.0
36.5-50.5
Propeller shaft nut
150-200
15.0-20.0
108.5-144.5
Central bearing race bolt
40-60
4.0-6.0
29.0-43.0
Joint nut
18-28
1.8-2.8
13.5-20.0
Maintenance Materials Needed
Materials
Recommended SUZUKI Products
Used Parts
Lithium
lubricator
SUZUKI lubricator A
(99000-25010)
Oil seal
Seal sub
SUZUKI glue 1215
(99000-31110)
Manual transaxles Drain
plug
Lubricator
SUZUKI lubricator
(99000-25120)
Driven shaft universal
joint
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст