Chery S11 / Chery QQ. Manual — part 19
Chery QQ Service Manual Transmission System
Bearing tool
Bearing install tool
Oil seal install tool
Bearing outer race install
tool
Slotted spring pin
disassembly tool
Bearing install tool
Bearing install tool
Bearing disassembly
tool
Spacer disassembly tool
-97-
Chery QQ Service Manual Transmission System
-98-
Bearing install tool
Spacer disassembly tool
Spacer disassembly tool
Handle
Puller slide hammer
Puller
5th gear lock tool
E-ring install tool
Chery QQ Service Manual Transmission System
Chapter 6 Propeller Shaft
Universal joint
This propeller shaft is available for the vehicles with manual transaxles.
I. Summarization
The front wheel driven shaft adopts universal joint and the differential.
1. Wheel universal joint (right) 2. Boot
3. Driven shaft 4. Boot
5. Differential universal joint (right) 6. Differential universal joint (left)
7. Boot 8. Driven shaft
9. Boot 10. Wheel universal joint (left)
11. Output shaft bearing race 12. Output shaft bearing
II, Disassemble
1. Disassemble the left shaft.
On the ground:
Loosen the rivet, remove the propeller shaft nut and gasket on the Lift
-99-
1, Driven shaft nut 2, Rivet
Chery QQ Service Manual Transmission System
-100-
(1)Let out the transaxles oil.
(2)Remove the driven shaft universal joint to make the snap ring. Break away
from the differential universal joint splined hub.
1 , Driven shaft universal
joint (left)
(3) Remove the joint from the Suspension arm.
(4)Remove the ball joint bolt and nut and disconnect the suspension arm from the
steering .
1, Steering
2 , Ball joint bolt and nut
3,
Suspension
arm
(5) For disassembling the propeller shaft assembly, first pull out the inner universal
joint, second pull out the wheel universal joint from the steering .
1, Driven shaft nut A, Rivet
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст