Chery S11 / Chery QQ. Manual — part 67
Chery QQ Service Manual BCM Computer Control System
④
Stop condition of the door windows: it is the same as that of power windows. In the
stepping mode, once another switch is turned on, the operation (of lowering switch in
raising operation/lowering switch/raising switch in raising operation) stops.
2. Supplying circuit of power window (see theftproof computer)
3. Inspection of the circuit of the power window
(
1)In this circuit, for the BCM computer (theftproof computer) controlled power
window, the direction of the current through the power window motor is changed
automatically to make the motor rotating clockwise or anticlockwise, so that the door
window is raised or lowered.
(
2)If the start-up switch turned on, the BCM computer (theftproof computer) actuates
the power window by supplying operating signal to the power window switch.
(
3)If the start-up switch turned off, the BCM computer (theftproof computer) actuate
the power window relay within the operating delay of 30s, i.e. after the start-up switch
turned off, all the door windows can be actuated within 30s.
(
4)Push the power window switch upward or downward (over 0.3s), the BCM
computer (theftproof computer) instructs with signal to supply forward or backward
current, so as to rotate the power window motor clockwise or anticlockwise.
(
5)With the start-up switch on, push the power window switch upward or downward,
check if there is forward or backward current output on the terminals of the BCM
computer (theftproof computer). If not, the switch is defective, if voltage is output
thereon, but the power window wouldn’t rise or lower, then the power window motor is
defective.
The power window hoister
4.
Inspection and Repair
of Electric Components
(
1)control device of the power window
Check the conductance of the power window main switch as shown in the figure. If it
does not conform to the figure, replace the power window main switch.
- 112 -
Chery QQ Service Manual BCM Computer Control System
switch switch
position
Connection to the instrument
conductance
UP 13-12 Yes
OFF 3-12 Yes
Switch on the
driver side
DOWN 14-12 Yes
UP
5-12 3-12 5-3
Yes
OFF 3-12 Yes
Switch on the
by-driver
side(window
unlocked)
DOWN
6-12 3-12 3-6
Yes
UP 5-12 Yes
OFF -
Switch on the
by-driver
side(window
locked)
DOWN 6-12 Yes
UP
9-12 3-12 9-3
Yes
OFF 3-12 Yes
Rear left
switch(window
unlocked)
DOWN
10-12 3-12 3-10
Yes
UP 9-12 Yes
OFF -
Rear left
switch(window
locked)
DOWN 10-12 Yes
UP
1-12 3-12 1-3
Yes
OFF 3-12 Yes
Rear right
switch(window
unlocked)
DOWN
2-12 3-12 2-3
Yes
UP 1-12 Yes
OFF -
Rear right
switch(window
locked)
DOWN 2-12 Yes
Figure Inspection of conductance of power window main switch
(
2)window secure switch
- 113 -
Chery QQ Service Manual BCM Computer Control System
switch
position
connection to the
instrument
conductance
ON 12-11
Yes
Front driver side secure
switch
OFF 3-12
Yes
On the door interior panel of the drive side, an rear window secure switch button is
provided. Push the button, the power windows switches of the by-driver side and the
both rear door windows are deactivated. Then the corresponding window switches can
only be controlled from the window switch on the driver side.
Description of the switches
Among all the four doors, the control switch for the other three doors, rearview mirror
adjust switch and secure switch are only provided on the front left door.
Note: with the secure switch the switched on the rear doors can be locked. Only when
the secure switch is pulled out, the rear windows can be opened and closed with these
switches.
(
3)Check the conductance of switches on the passenger door window, rear left door
window and rear right window as shown in the figure. If it does not conform to the figure,
replace the power window switch.
Switch position
Connection to
the instrument
Conductance
UP 1-5 Yes
OFF -
DOWN 3-5 Yes
Inspection of conductance of power window switch
(
4)Inspection of conductance of power window motor on the front left door
Connected the terminal 1 to positive pole of the secondary cell, the terminal 2 to the
- 114 -
Chery QQ Service Manual BCM Computer Control System
negative pole of the secondary cell, and check if the motor rotates clockwise as shown in
the figure; connect the terminals reversely, check if the motor rotates anticlockwise. If
the result is not as mentioned, replace the front left power window motor.
Figure Inspection of left front door motor
(
5)Inspection of conductance of power window motor on the front right door
Connected the terminal 2 to positive pole of the secondary cell and the terminal 1 to the
negative pole of the secondary cell, and check if the motor rotates clockwise as shown in
the figure; connect the terminals reversely, check if the motor rotates anticlockwise. If
the result is not as mentioned, replace the front left power window motor.
(
6)Inspection of conductance of power window motor on the rear left door
Connected the terminal 1 to positive pole of the secondary cell, the terminal 2 to the
negative pole of the secondary cell, and check if the motor rotates clockwise as shown in
the figure; connect the terminals reversely, check if the motor rotates anticlockwise. If
the result is not as mentioned, replace the rear left power window motor.
(
7)Inspection of conductance of power window motor on the rear right door
Connected the terminal 1 to positive pole of the secondary cell, the terminal 2 to the
negative pole of the secondary cell, and check if the motor rotates clockwise as shown in
the figure; connect the terminals reversely, check if the motor rotates anticlockwise. If
the result is not as mentioned, replace the rear left power window motor.
(
8)Typical troubleshooting of power windows
Table Typical troubleshooting of power windows
symptom
possible reasons
solution
Start up switch on, power
window does not work
FuseFuse blowing out
power window switch
theftproof computer
replace
repair or replace
repair or replace
- 115 -
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст