Chery Fora (Elara A520). Manual — part 24

Chery Service Manual for A520 Body Dimension and Accessories

10

23. Detach the evaporator assembly after

removes the fastening bolts and the
ground wire;

Figure 141

Figure 142

Figure 143

Chery Service Manual for A520 Body Dimension and Accessories

11

Figure 144

24.

Detach the evaporator assembly after
removes the fastening bolts and the
ground wire;

Figure 145

25.

Remove the engine compartment shock
pad.

Figure 146

Ground Wire

Chery Service Manual for A520 Body Dimension and Accessories

1

CHAPTER THREE DOOR

I.

DISASSEMBLING

THE

LEFT

FRONT DOOR

1.

Remove the trim strip from the left front
door;

Figure 44

2.

Remove the outside weather strip from
the left front door;

Figure 45

3.

Remove the set screw. Pull out the
harness and then remove the outside rear
view mirror after detaches the door trim
panel;

Assembly requirements: Make sure that the
clearance between the rear view mirror rand
and the door outside trim panel is uniform
when fitting. The tightening torque for the
screw is 5±0.5N·m. The rear view mirror
could be freely, flexibly and reliably adjusted
after installation. The plug in unit of the rear
view mirror should be fixed inside of the
door trim panel.

Figure 46

Chery Service Manual for A520 Body Dimension and Accessories

2

4. Unscrew the set screw on inside door

handle to detach the bezel for the inside
door handle;

Figure 47

5. Remove the screws and take out the arm

rest cover. Pry out the window regulator
switch and pull out the harness;

Figure 48

6. Remove the fixing bolts on the left front

door trim panel (in figure 49 and 50) to
detach the door trim panel.

Assembly requirements: Measures should
be taken to prevent blurring the working
area for cleaning when disassembling and
installing. It is of great importance to keep
clean during these jobs. The fit clearance
between the door trim panel and the inner
door panel should be uniform.

Figure 49

Window

regulator

switch