Chery Fora (Elara A520). Manual — part 21

Chery Service Manual for A520 Body Dimension and Accessories

5

2)

Remove the connecting screws that
attach the speed regulating resistor
module to the evaporator housing, and
then pull out the speed regulating
resistor module.

3.4.2 Installing the speed regulating resistor

of the blower fan

The installing steps are reverse to those for
removal.

3.5 Replacing the mixing damper servo

motor

3.5.1 Disassembling procedures

Remove the pull rod connecting with the
motor and remove the fastening screws
connecting the motor with the bracket (3).

3.5.2 Installation procedures

The installing steps are reverse to those for
removal.

Note: After installs the motor, connect the
electrical connector, turn the ignition switch
to ACC position, turn on the air conditioner
(AC) and turn the AC temperature adjusting
knob to HOTTEST or COLDEST, and close
the AC panel until the motor stops. Adjust the
mixing damper manually to HOTTEST or
COLDEST position according to the status,
and then adjust the pull rod to a proper
position to connect with the motor.

Chery Service Manual for A520 Body Dimension and Accessories

6

3.6

Replacing the mode damper servo motor

3.6.1

Disassembling procedures

Remove the pull rod connecting with the
motor and remove the fastening screws
connecting the motor with the bracket (3).

3.6.2

Installation procedures

The installing steps are reverse to those for
removal.

Note: After installs the motor, connect the
electrical connector, turn the ignition switch
to ACC position, turn on AC and adjust its
BLOW mode to FACE mode, and then close
the AC panel until the motor stops. Adjust the
mode damper manually to a required position
according to the status, and then adjust the
pull rod to a proper position to connect with
the motor.

3.7

Replacing the inner and outer cycling
servo motor

3.7.1

Disassembling procedures

Remove the pull rod connecting with the
motor and remove the fastening screws
connecting the motor with the bracket (3).

3.7.2

Installation procedures

The installing steps are reverse to those for
removal.

Note: After installs the motor, connect the
electrical connector, turn the ignition switch
to IGN position, turn on the AC and adjust it
to inner cycling or outer cycling mode, and
then close the AC panel until the motor stops.
Adjust the mode damper manually to a
required position according to the status, and
then adjust the pull rod to a proper position to
connect with the motor.

Chery Service Manual for A520 Body Dimension and Accessories

7

3.8

Replacing the indoor temperature sensor

3.8.1

Disassembling procedures

Disconnect the plug in unit of the sensor
harness, remove the connecting screw that
attach the hose to the housing and remove the
hose, replace it.

3.8.2

Installation procedures

The installing steps are reverse to those for
removal.

Chery Service Manual for A520 Body Dimension and Accessories

1

CHAPTER SIX INSTRUMENT PANEL

1. Horn Switch

2. Combination Instrument

3. Vent of Air Conditioning

4. Air Bag for Front Passenger Side

5. Steering Wheel Assembly

6. Air Bag Assembly

7. Ashtray

8. Air Conditioner Control Panel

9. CD Player Assembly

10. Glove Box Assembly

5

7

8

9

10

2

4

3

1

3

6