Chery A18. Manual — part 103
22
4.
Disassembling or assembling step
4.1
Disassemble fixed nuts on left and right sides of
steering buttonhead latch with 19# sleeve.
Moment of force: 40±5 N.m
4.2
Loosen fixed nut on rear side of oil pipe of power
assisted steering with 18# fixing wrench
Moment of force: 25±5 N.m
4.3
Loosen fixed nut on front side of oil pipe of power
assisted steering with 13# fixing wrench.
Moment of force: 25±5 N.m
4.4
Disassemble four fixed bolts and nuts of Steering
engine on underframe with 15# sleeve.
Moment of force: 100±10 N.m
23
4.5
Disassemble fixed bolt of gear plank on power
steering engine with 13# open-end wrench.
4.6
Disassemble another fixed bolt of gear plank on
power steering engine with 13# open-end wrench.
4.7
Disassemble fixed bolt of steering universal joint
with 13# sleeve.
4.8
Disassemble steering assembly after brought out
steering universal joint in cabin.
5.
Assembling step
Conduct assembly by referring to disassembling step.
24
II. Disassembly and assembly of steering column
1.
System constitution diagram
1-Plank 2-Steering column assembly 3-Assembly of power steering universal joint
4-Bolt- fixing gear of steering gear 5-Nut-steering engine and underframe 6-Bolt-fixing steering column
7-Compression spring-steering column 8-Lower bearing of steering column 9-Assembly of steering shaft
10-Assembly of steering column cover sheet 11-Compression spring 12-Contact ring of loudspeaker cover
13-Safety bolt 14-Tooth profile sleeve 15-Assembly of steering universal joint
16-Assembly of lower plank of steering column
2.
Preparation
Tools: Flatheaded screwdriver, Philips driver, 5.0 hexagonal socket, 8#、10#、13#、22# sleeve.
3.
Precautions
3.1
25
3.2
Avoid of contacting skin or eye with steering fat liquor while disassembling steering system.
3.3
Please switch off cathode of battery before disassemble steering wheel, to prevent safety airbag from
puffing.
4.
Disassembly and assembly of steering wheel and
combination switch
4.1
Bring out loudspeaker cover of steering wheel by
hand.
4.2
Pull out pin of loudspeaker line on rear side of
loudspeaker cover by hand.
4.3
Disassemble fixed nut of steering wheel with socket
wrench.
4.4
Take out steering wheel with hands.
4.5
Disassemble fixed bolt of cover sheet on combination
switch with Philips driver.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст