Chery A series. Manual — part 53
DISASSEMBLY OF THE DRIVE SHAFT
——Tyre disassembly.
——Disassemble two bolts of the brake cylinder and
brake shoe assembly. And hang the assembly on
the shock absorber by the hook.
——Disassemble the connecting bolt of brake disc
and front axle, and make front axle ball joint off
by pressing it downward.
——
Loosen the two fixing bolts under the brake disc
and shock absorber.
J-4
——Disassemble the round head bolt of steering
knuckle and steering rod, prize up the round
head bolt upward.
——Turn the brake disc and disassemble the 6 torx
head bolts of driving shaft and differential output
shaft, and take off the shim and bolt.
——Take off the 2 fixing bolts under the brake disc
and shock absorber, pull off the driving shaft and
brake disc assembly.
J-5
DISASSEMBLY OF THE TRANSMISSION
——Discharge the transmission oil.
——Disassemble the driving shaft.
——Disassemble those 3 fixing bolt of the
transmission lower shim.
——Disassemble the crankshaft position sensor.
——Disassemble the backup lamp switch plug.
——Disassemble the speed sensor plug.
——Prize up the round head clamp by screw
driver, take off the selector rod.
——Disassemble cotter pin, and take off shift lever
and shift mechanism linkage.
——Disassemble the gear shift arms subassembly.
J-6
——Disassemble cathode cable of the accumulator;
disassemble the anode cable and plug of the
starter.
——Disassemble the fixing bolt between engine
front overhang bracket and front cross
member.
——Sling the engine.
——Disassemble the fixing bolt of the starter.
——Take off front overhang bracket of the starter
and the engine.
——Loosen connecting bolt between left / right
suspension and sub frame.
——Disassemble the connecting bolt ( altogether 3
pieces)between left/right suspension and
transmission.
J-7
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст