Chery A series. Manual — part 108
5. Remove the interior trim rim (pull
downward as shown in the figure). Pay
attention not to damage the control buttons.
6. Remove the damaged sunshade.
Assembly
7. Install the right guide device and the rear
supporter of sunshade.
S-83
8. Wind up the sunshade and wrap the string
on the right guide roller.
9. Place the string in the sliding fastening cap
and the guide device.
10.Place the mechanical devices in a tilt
position. Remove the lock from the pin joint
and then remove the latter. If feel more
resistance, make left-and-right shake while
removing.
11. Remove the mechanical devices from the
rear of guide rail.
S-84
12. Push out the guide lock as shown in the
figure.
13. Remove the lock from the guide rail.
Assembly:
14. Place the new guide lock in the guide rail.
15. Install the guide lock in the proper position.
S-85
16. Disengage the front riser and the rail slide
device, then remove the latter.
17. Inspect the new rail slide device.
18. Install in the reverse order of step 16.
S-86
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст