Chery A series. Manual — part 109

19. Install in the reverse order of step 11.

20. Install in the reverse order of step 10.

21. Install in the reverse order of step 9.

22. Install in the reverse order of step 8.

S-87

23. Install in the reverse order of step 7.

24. Install in the reverse order of step 6.

25. Fully close the sunroof by pulling the rack

(make sure that it is done properly), and
verify that the pin joint not being jammed
in the mechanical devices.

S-88

26. Install the rack, the pinion and the pinion

cover. Note that the pinion should be
placed at the center.

27. Slide the glass panel into the mechanical

devices in parallel.

28. Install the fastening pin of glass panel

through rotating 90 degrees only.

29. Push the lock of glass panel to the proper

position.

S-89

PROGRAM DESCRIPTION

In the case of power-failure and service of
sunroof, all of sunroof’s functions can be
restored only after the re-program of sunroof is
performed.

If the sunroof fails to function properly, try to
re-program the sunroof.

1. Program and turn on ignition switch.

2. Press the button to close the sunroof fully,

then press the button again for at least 5
seconds.

3. Fully open the sunroof and complete the

re-program of sunroof, and all of functions
of sunroof will be restored.

S-90