Chery A series. Manual — part 98

SIZE ADJUSTMENT FOR MOVABLE PARTS
To facilitate test and re-installation of the body moveable parts, the correct clearances of
these parts after adjustment are listed below.

TEST DATA

A=4±0.5 B=6.5±1 C=4±0.5 D=6.5±1 E=4±0.5 F=7.5±1 G=4±0.5

S-43

OPENING SIZE OF ENGINE
COMPARTMENT AND WINDSCREEN

Size Code STD Value Part Measured
A1090 ±2mm Front Mount

Installation Center

B1550 ±2mm Diagonal Line

between Fixing
Bolts of Fenders

C628 ±2mm Space between

Mount Installation
Center and Fender

D997 ±2mm Space between

Center of Fire Wall
and Fixing Bolts of
Fender

E731 ±2mm Opening of

Windscreen

Inspect length of diagonal lines of engine
compartment and diagonal lines of the outer
frame of windscreen.
The values of a group of diagonal lines should
be equal:
A1=A2； B1=B2

S-44

Size Code STD Value Part Measured
A 1235±2mm Opening of Boot
B 1142±2mm Y-Directional

Distance of Boot

Inspect the length of diagonal lines in the outer
frame of luggage boot.
Values of a pair of diagonal lines should be
equal:
A1=A2；

INSPECT THE SPACE BETWEEN
COLUMN B & COLUMN C

Size Code STD Value Part Measured
A 1484±2mm Y-Directional Space of
Installation

Positions for Locking
Column of Column B

B 1365±2mm Y-Directional Space of

Fixing Seats for Safety
Belts with Front Seats

C 1098±2mm Y-Directional Space of
Rear Mount

Installation Center

Positions
D 1459±2mm Y-Directional Space of

Installation Positions
for Locking Columns
of Real Fender

S-45

INSPECT THE SPACE BETWEEN
HINGES OF COLUMN A

Size Code STD Value Part Measured

A 360±0.5mm Z-Directional Distance

of Hinges with
Column A

S-46