Chery Tiggo T11 LHD. Manual — part 1

Chery T11 Service Manual

Body and Accessories

-1-

Chapter Ⅴ

Body and Accessories

Chery T11 Service Manual

Body and Accessories

-2-

Section 1 Removal and Installation of Accessories

Ⅰ Door and Door Lock

1. Specification

Specifications of Tightening Torque

2. Engine Hood

Removal and Installation of Engine Hood

1) Loosen 4 fixing bolts for the hinge, and lift

the engine hood.

2) Remove the engine hood.

3) Install in the reversed sequence.

Tightening Torque for cconnection between

engine hood and its hinge: 23±2Nm

Part No.: Ql400820 (2 pcs)

Specification

Description

36±4

Connection between upper hinge of left/right front door and body

36±4

Connection between upper hinge of left/right front door and door

36±4

Connection between lower hinge of left/right front door and body

36±4

Connection between lower hinge of left/right front door and door

36±4

Connection between upper hinge of left/right rear door and body

36±4

Connection between upper hinge of left/right rear door and door

36±4

Connection between lower hinge of left/right rear door and body

36±4

Connection between lower hinge of left/right rear door and door

36±4

Connection between upper hinge of back door and body

50±5

Connection between upper hinge of back door and door

35±3

Connection between lower hinge of back door and body

50±5

Connection between lower hinge of back door and door

23±2

Connection between left hinge of engine hood and body

23±2

Connection between left hinge of engine hood and engine hood

23±2

Connection between right hinge of engine hood and body

23±2

Connection between right hinge of engine hood and engine hood

l0±l

Connection between rear mounting bracket of front fender and body

l0±l

Connection between left/right front fender and body

l0±l

Connection between water tank crossmember assy. and body

Chery T11 Service Manual

Body and Accessories

-3-

3. Removal and Installation of Hinge

1) Removal of fender

The fender is fixed by 7 bolts in tightening

torque of 10Nm at the mounting places as
shown in the figure.

2) Loosen 2 fixing bolts and remove the

hinge.

3) The gap between engine hood and the body

can be adjusted by the rubber pad at both
sides of the engine hood.

4) Install in the reversed sequence.

Tightening Torque for connection between

engine hood and the body: 23±2

Part No.: Q1400820 (2 pcs)

1

2

3

4

5

6

7

Chery T11 Service Manual

Body and Accessories

-4-

4. Removal and Installation of Doors

Right Front Door

1) Dismantle the fixing bolts for the hinge of

front door.

2) Dismantle the fixing bolts of door stopper.

3) Remove the front door.

Please refer to the removal procedure of
right front door for the disassembly of
the other doors except the back door.

4) Install in the reversed sequence.

Tightening torque for connection between
left/right front door hinge and body: 36±4

Part No: T11-6101001 (4 pcs)

Tightening torque for connection between
left/right front door hinge and door: 36±4

Part No.: T11-6101001 (4 pcs)

Tightening torque for connection between
left/right door stopper and body: 11Nm

Part No: Q1840616 (2 pcs)

5. Removal and Installation of Back Door

1) Dismantle two fixing bolts connecting back

door and hinge.