Chery Tiggo T11 LHD. Manual — part 105

Chery International Instrument panel

I

Parking indicator

Parking braking

warning lamp

Fuel quantity

alarm

Engine speed

recorder

Door open

indicator

Recharge indicator

Front fog

lamp

indicator

Engine self-

checking

indicator

Turn left

signal

indicator

Braking

system

warning

lamp

Speedometer

Headlamp

indicator

Airbag

indicator

Turn right

signal

indicator

ABS failure indicator

Fuel quantity indicator

Fuel pressure alarm

Coolant temperature

indicator

Gear

indicator

Coolant

alarm

Total

driving

mileage

display

Adjustment

button

Rear fog

lamp

indicator

Safety belt

indicator

Clock

and

short

distance

display

Chery International Instrument panel

Engine coolant temperature

gauge

It displays the temperature of the
engine coolant.

<C – low-temperature zone

During the warming up process, the
engine will operate within this zone for
a short period of time. It shall be
avoided that the engine operates at

high speed in this temperature zone.
Meanwhile, the working load of the
engine can’t be over-great.

If the pointer stays in this zone for a
long period of time, please drive to the
Cherry Authorized Service Station to
make your car examined and repaired.

C to H – normal temperature
zone

In the case of normal driving, the
pointer shall stay within this zone. The
pointer may drift out of this zone when
the outside temperature is very high
and the engine is with heavy load. You
still can drive the car so long as the
coolant warning lamp does not flash. If

the coolant warning lamp flashes, shut
off the engine and then check the
cooling system.

>H – overheated zone

If the pointer gets into this red zone, it
indicates that

the

engine is

overheated. In this case, please
securely stop your car immediately,
turn off the ignition key and find the
cause of problem after the engine
cools down.

Please don’t open the
expansion tank cover

when

the

engine is still

overheated. Restart the engine

Chery International Instrument panel

only after troubleshooting.

Description:

Installing the auxiliary front headlamp
on the front of cold air inlet located
under the front bumper will make
influence on the circulation of the
cooling airflow, which has some
disadvantages to cool the engine.

If the outside temperature is very high,
the engine is easily overheated when
the engine operates under heavy load!

The front

spoiler

is also used for

directing the cooling air. It may cause
the engine overheating if the spoiler is
damaged or even broken due to

impact. In this case, please get to the
Chery Authorized Service Station in
time to have the front bumper
repaired.

Fuel quantity gauge

Fuel tank capacity: 57 liters.

The fuel tank remains approximate 10

liters fuel when the pointer just point to
the red warning position (the first red
short bar).

The pointer may move away from the
FULL position (F) only after the fuel
tank is refueled to full range and the
vehicle drives a stretch of distance.

When

refueling

the fuel tank again, the

refillable fuel quantity may slightly
lower than the rated capability
because some fuels remain in the
tank.

If the low fuel-level warning lamp
lights, please refuel A.S.A.P. See “Low
fuel-level warning lamp”.

Chery International Instrument panel

Speedometer

It indicates the current driving speed of
the car.

NOTICE:

The speedometer is subject to the
influence of tire size of the vehicle.
Please use the Chery authorized tires
with original size, otherwise, the

speedometer may not show the proper
speed of vehicle.

Odometer, digital clock

The total mileage quantity is shown in
the low right part of the odometer. And
the time or one-way mileage in
kilometer is shown in the upper right
part.

Time is displayed in digitals

The method to switch and adjust

the time and one-way mileage
quantity display is illustrated as

follows:

Press the RESET button on the
speedometer to switch the display
between time and one-way mileage
quantity.



When the odometer displays the
one-way mileage quantity, you
can press the RESET button on
the speedometer for a long time
to reset the reading to zero.



When the odometer displays the
time, you can press the RESET
button on the speedometer for a
long time to adjust the clock.