Chery Tiggo T11 LHD. Manual — part 42
T11 Service Manual Suspension and Steering
Ⅳ Removal and Installation of Rear Suspension Lower Control Arm
Assembly
Disassembly procedures:
1) Unscrew the connecting bolt that joins rear
suspension lower control arm and rear towing arm.
2) Unscrew the connecting bolt that joins rear
suspension lower control arm and rear connecting
rod.
3) Unscrew the connecting bolt that joins rear
suspension lower control arm and rear subframe
welding assembly.
4) Remove the rear suspension lower control arm.
Installation procedures:
1) Refer to disassembly procedures to perform assembly.
2) Precautions:
a) Once loosening the binding bolt whose torque and angle tightening condition is controlled by
yield limit, it must be replaced.
b) After installation, torque each bolt to specification.
T11 Service Manual Suspension and Steering
Ⅴ Removal and Installation of Rear Suspension Upper Link
Assembly
Disassembly procedures:
1) Unscrew the connecting bolt that joins rear
suspension upper link and rear towing arm.
2) Unscrew the connecting bolt that joins rear
suspension upper link and rear subframe welding
assembly.
3) Remove the rear suspension upper link.
Installation procedures:
1) Refer to disassembly procedures to perform assembly.
2) Precautions:
a) Once loosening the binding bolt whose torque and angle tightening condition is controlled by
yield limit, it must be replaced.
b) After installation, torque each bolt to specification.
T11 Service Manual Suspension and Steering
Ⅵ Removal and Installation of Rear Towing Arm Assembly
Disassembly procedures:
1) Unscrew the connecting bolt that joins rear
towing arm and shock absorber hinge bracket.
2) Unscrew the connecting bolt that joins rear
towing arm and upper link.
3) Unscrew the connecting bolt that joins rear
towing arm and lower control arm.
4) Unscrew the connecting bolt that joins rear
towing arm and hand brake cable bracket.
T11 Service Manual Suspension and Steering
5) Unscrew the connecting bolt that joins rear
towing arm and brake line bracket.
6) Unscrew the connecting bolt that joins
rear-towing arm to vehicle body.
7) Remove the rear-towing arm.
Installation procedures:
1) Refer to disassembly procedures to perform assembly.
2) Precautions:
a) Once loosening the binding bolt whose torque and angle tightening condition is controlled by
yield limit, it must be replaced.
b) After installation, torque each bolt to specification.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст