Chery QQ6 (S21) / S12LHD. Manual — part 168

II. Instructions on Main Connectors

III. Removal and Installation of Right-front Door In-door Harness

Part number: S21-3724080
1. Removal
See Removal of Left-front Door In-door harness.
2. Installation
The installation steps are reverse to those for removal.

No

Connector Name

Pins

Connection

Remark

1

Right-front

door

in-door

harness

connector

16

In-door harness

2

Right-front window motor connector

2

Right-front window motor

3

Right-front window switch connector

10

Right front window switch

4

Right-front door lock connector

4

Right-front door lock

5

Right-front speaker connector

2

Right-front speaker

6

Power rearview mirror motor / right
turning light connector

6

Power rearview mirror motor /
right turning light

Section VIII Rear Door Harness

I. Harness Sketch

接室内线
束插件B

接室内
线束A

右后窗开关

右后扬声器

右后门锁

To in-door harness A

To in-door harness B

Right-rear loudspeaker

Rear window motor

Right-rear

window

switch

Right-rear door lock

II. Instructions on Main Connectors

III. Removal and Installation of Right-rear Door In-door Harness

Part number: S21-3724180

(I). Preparations

Tools: sleeve wrench, cross head screwdriver, flat head screwdriver

(II). Notes

When disassembling the electrical components and harness, please disconnect the power supply.
The ignition switch must be OFF.

(III). Removal Steps

1. Removal
1.1. Disassemble the rear inside door shield. (See Removal of Inside
Door Shield)
1.2. And then remove the inside left-rear door protecting film.
1.3. Unplug right-rear window connector.






1.4. Unplug the door lock harness connector.

No

Connector Name

Pins

Connection

Remark

1

Right-rear window switch connector

10

Right-rear window switch

2

Right-rear door lock connector

4

Right-rear door lock

3

To in-door harness connector A

10

In-door harness A

4

Rear window motor connector

2

Rear window motor

1.5. Unplug the elevating motor connector.











1.5. Disassemble the lower-right B-pillar shield. (See Removal and
Installation of Door Shield )
1.6. Unplug the connector that connects the inside door harness and
in-door harness.








1.7. Unplug door contact switch connector.











1.8. Pull out the inside door harness protective rubber jacket, and
take out the harness assembly from inside the door.









2. Installation
The installation steps are reverse to those for removal.
Note: See Removal of Right-rear Door Harness for details about the
inside left-rear door harness.