Chery QQ6 (S21) / S12LHD. Manual — part 177

2. Preparations

Tools: 11#, 13#, 15#, 16#, 16#, 19#, 30# socket, Slotted screwdriver,

priers.

3. Notices

3.1 Please wear necessary labor protection supplies to avoid

accidents.

3.2 Notice to lock the safety lock of the elevator during the repair of

the chassis.

3.3 When carry out removal/installation to shock absorber spring,

prevent spring ejection from being injured.

4. Removal/Installation Procedure

4.1 Removal of Shock Absorber Assembly and Shock Absorber
Spring.

4.1.1 Remove the tire fixing nuts with 19# torque wrench or vehicle

attached wrench to remove the tire (take left side for instance).

Torque: 110±10 Nm

4.1.2 Remove the connecting bolts of shock absorber assembly and

rear axle with 18# socket.

Torque: 100±10 Nm

4.1.3 Remove the connecting bolts of shock absorber assembly and

vehicle body with 18# socket to remove the shock absorber

assembly.

Torque: 100±10 Nm

4.1.4 Pry out the rear coil spring with screwdriver.

4.1.5 Vibrate from side to side with force with hand to remove the

rear bumper block.

4.2 Cross Stay Assembly

4.2.1 Remove the connecting bolts of cross stay and left side of

vehicle body with 16# socket.

Torque: 100±10 Nm

4.2.2 Remove the connecting bolts of cross stay and right side of

vehicle body with 15# socket to remove the cross stay assembly.

Torque: 100±10 Nm

4.3 Rear Trailing Arm Assembly

4.3.1 Remove the connecting bolts from the rear side of rear axle

and trailing arm assembly with 13# socket.

Torque: 100±10 Nm

4.3.2 Remove the connecting bolts from the middle side of rear axle

and trailing arm assembly with 13# socket.

Torque: 100±10 Nm

4.3.3 Remove the connecting bolts of trailing arm and vehicle body

with 15# wrench to remove the rear trailing arm assembly.

Torque: 100±10 Nm

4.4. Removal of Rear Axle Assembly

4.4.1 Remove the connecting bolts of brake pipeline and rear axle

with 11# socket. Notice the storage of brake liquid.

Torque: 16±3 Nm

4.4.2 Remove the rear brake band drum assembly.

4.4.3 Remove the handbrake cable with priers.

4.4.4 Remove the lock nuts from the rear brake band drum assembly

with 30# socket to remove the rear brake band drum assembly.

Torque: 180±10 Nm

4.4.5 Remove the rear axle assembly.

5. Installation Procedure

The installation procedure is reverse to that of removal.