Chery QQ6 (S21) / S12LHD. Manual — part 52

34

Chapter 3 Disassembly/Reassembly and Maintenance of

Steering System

I. Removal/Installation of Steering Wheel

1. System Composition Diagram

1. Power Assist Steering Fluid Reservoir 2. Support Fixing Bolt

3. Support Fixing Nut 4. Oil Output Pipeline

5. Fluid Reservoir Fixed Support 6. Steering Pump

7. Tensioner Pulley 8. Lock Nut

9. Adjusting Nut 10. Adjusting Bar

11. Pipe Clamp 12. Steering Wheel

13. Oil Output Pipe 14. 15. Fixing Bolt

16. Fixing Nut 17. Oil Return Pipe

35

2. Decomposition Diagram of Steering Wheel

1-Lock Nut 2-Lateral Tie Bar 3-Input Shaft 4-Left Installation Support

5--Right Installation Support

3. Schematic Diagram of Steering Universal Joint and Protective Sleeve

2. Preparation

Tools: 15#, 19# socket wrenches , 13#, 18# non-adjustable wrenches.

Accessories: power steering fluid

3. Precautions

3.1 Please wear necessary labor protection supplies to avoid accidents.

3.2 Avoid steering fluid to contact with skin or eyes when disassembling steering system.

S21-3404060

Steering Universal Joint
Protective Sleeve assy

1

1

2

2

3

4

5

36

4. Removal/Installation Step

4.1 Remove the fixing bolts from the right and left sides of

steering ball pin with a 19# sleeve.

Torque: 40±5 N.m

4.2 Loosen the fixing bolts from the lower of power

assist steering oil pipe with a 18# non-adjustable wrench.

Torque: 25±5 N.m

4.3 Loosen the fixing bolts from the upper of power

assist steering oil pipe with a 13# non-adjustable wrench.

Torque: 25±5 N.m

4.4 Remove the fixing bolts and nuts from the upper of right

support of the power assist steering wheel with a 15# sleeve.

Torque: 100±10 N.m

4.5 Remove the fixing bolts and nuts from the lower of right

support of the power assist steering wheel with a 15# sleeve.

Torque: 100±10 N.m

37

4.6 Remove the fixing bolts and nuts from the upper of left

support of the power assist steering wheel with a 15# sleeve.

Torque: 100±10 N.m

4.7 Remove the fixing bolts and nuts from the lower of left

support of the power assist steering wheel with a 15# sleeve.

Torque: 100±10 N.m

4.8 Remove the fixing bolts from the steering universal joint

by hand. Then remove the steering wheel assy.

5. Installation Step

Refer to Removal Step.