Chery QQ6 (S21) / S12LHD. Manual — part 50
26
II. Disassembly, Reassembly and Maintenance of Rear Axle and
Suspension System
1. Structural Diagram of System
Structural diagram of Rear Axle and Suspension System
1
Rear Trailing Arm Assy
7
Rear Shaft Welding Assy
13
Nut
2
Bolt
8
Lateral Support Bar Assy
14
Nut
3
Rear
Shock
Absorber
Assy
9
Rear Spring Cushion
15
Bolt
4
Nut
10
Rear Bumper Block
16
Lock Nut
5
Bolt
11
Rear Coil Spring
17
Rear Brake With Drum Assy
6
Bolt
12
Nut
18
Bolt
27
2. Preparation
Tools: 11#, 13#, 15#, 18#, 19#, 30# sleeve; right-angled screwdriver;
pincers.
3. Precautions.
3.1 Please wear necessary labor protection supplies to avoid accidents.
3.2 Please attention whether the safety lock of lifter is locked when maintaining the chassis.
3.3 When carry out disassembly and assembly to shock absorber spring, prevent spring ejection
from being injured.
4. Removal/Installation Step
4.1. Removal of shock absorber assy and absorber spring
4.1.1 Remove the tightening nuts from the tires with a 19# torque
spanner or attached wrench, and then take off the tires (left side as
an example).
Torque: 110±10N.m
4.1.2 Remove the connecting bolts from the shock absorber assy and
rear axle with a 15# sleeve.
Torque: 100±10 N.m
4.1.3 Remove the connecting bolts of the shock absorber assy and
body with a 18# non-adjustable wrench, and then take off the shock
absorber assy.
Torque: 100±10 N.m
28
4.1.4 Unclench the rear helical spring with a screwdriver.
4.1.5 Forcefully swing leftwards and rightwards the rear
bumper block by hand and then take off the block.
4.2. Removal of lateral support bar assy
4.2.1 Remove the connecting bolts from the left side of body
and lateral support bar with a 15# sleeve.
Torque: 100±10N.m
4.2.2 Remove the connecting bolts from the right side of body
and lateral support bar with a 15# sleeve, and then take off the
lateral support bar assy.
Torque: 100±10N.m
4.3. Removal of rear trailing arm assy
4.3.1 Remove the connecting bolts from the rear of rear axle
and trailing arm assy with a 13# sleeve.
Torque: 100±10N.m
29
4.3.2 Remove the connecting bolts from the intermediate of rear
axle and trailing arm assy with a 13# sleeve.
Torque: 100±10N.m
4.3.3 Remove the connecting bolts from the trailing arm and
body with a 15# wrench, and then take off the rear trailing
arm assy.
Torque: 100±10N.m
4.4. Removal of rear axle assy
4.4.1 Remove the connecting bolts from the brake pipeline
and rear axle with a 11# wrench. Attention to storage of brake
fluid.
Torque: 45±5 N.m
4.4.2 Remove the rear brake with drum assy by hand.
4.4.3 Remove the hand brake control cable with a plier.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст