Chery QQ6 (S21) / S12LHD. Manual — part 49
22
4.1.4 Remove three fixing bolts to the frame from the shock
absorber assy with a 15# sleeve.
Torque: 60±5N.m
4.1.5 Remove the shock absorber assy.
4.2. Removal of control arm assy
4.2.1 Remove the fixing bolts to the control arm from the front
connecting rod assy with a 15# sleeve.
Torque: 100±10 N.m
4.2.2 Remove the connecting bolts of front push bar and control
arm with a 15# wrench.
Torque: 75±5 N.m
4.2.3 Remove the ball bolts from the control arm and steering
universal joint assy with a 18# sleeve.
Torque: 100±10N.m
4.2.4 Remove the connecting bolts from the control arm and front
axle with a 18# sleeve, and then take off the control arm assy.
Torque: 150±10 N.m
23
4.3. Removal of front axle
4.3.1 Remove the fixing bolts from the mud guard of chassis with
a 8# sleeve, and then take off the mud guard assy.
Torque: 3±0.5 N.m
4.3.2 Remove the front bracket bolts to the subframe from the
transmission with a 19# sleeve.
Torque: 110±10N.m
4.3.3 Remove the rear bracket bolts to the subframe from the
transmission with a 19# sleeve.
Torque: 110±10N.m
4.3.4 Remove two connecting bolts from the exhaust manifold
with a 15# sleeve.
Torque: 50±5Nm.
4.3.5 Remove two connecting bolts used to connect the exhaust
manifold and rear muffler with a 15# sleeve.
Torque: 50±5Nm.
24
4.3.6 Remove the fixing bolts from the right side of power assist
steering wheel with a 15# wrench.
Torque: 75±5 N.m
4.3.7 Remove the fixing bolts from the left side of power assist
steering wheel with a 15# wrench.
Torque: 75±5 N.m
4.3.8 Remove the fixing bolts used to connect the push bar and
subframe with a 19# sleeve.
Torque: 105±10 N.m
4.3.9 Remove the fixed support from A/C pipeline on the subframe
with a 10# wrench.
Torque: 25±2.5 N.m
4.3.10 Remove the fixed support from the condenser and subframe
with a 13# wrench.
Torque: 45±5 N.m
.
25
4.3.11 Remove four nuts used to connect the subframe and body with
a 18# sleeve, and then take off the front axle assy.
Torque: 150±10 N.m
4.3.12 Remove the fixing bolts and nuts from gum cover of stabilizer
rod with a 13# sleeve.
Torque: 50±5Nm.
5. Installation Step
Refer to Removal Step of Front Axle and Front Suspension System.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст