Chery QQ6 (S21) / S12LHD. Manual — part 35

137

1.1.11. Remove the connector from main seat belt

switch.

1.1.12.

Remove

the

seat

and

carpet.

(See

Disassembly/Reassembly of Seat and Carpet)

1.1.13. Pull out two connectors A and B of the window

regulator.

1.1.14. Remove the grounding point.

1.1.15.

Remove

the

B

pillar

trim.

(See

Disassembly/Reassembly of Seat Belt)

1.1.16. Remove the front left door contact switch.

138

1.1.17. Pull out the connectors A and B to the right and

left rear door harnesses.

1.1.18.

Remove

the

ceiling.

(See

Disassembly/Reassembly of Ceiling)

1.1.19. Pull out the ceiling lampconnector.

1.1.20.

Remove

the

rear

seat.

(See

Disassembly/Reassembly of Rear Seat)

1.1.21. Take off the upper protecting cover of oil pump.

1.1.22. Pull out the connector to the fuel pump.

1.1.23. Pull out the connector of rear left wheel speed

sensor.

139

1.1.24.

Remove

the

C

pillar

trim.

(See

Disassembly/Reassembly of Ceiling)

1.1.25. Pull out the rear left door contact switch.

1.1.26. Pull out the connector to the back door harness.

1.1.27. Pull out the connector of rear trunk lamp.

1.1.28. Remove the left grounding point from the

luggage boot.

1. 1.29. Remove the connector of left tail lamp.

1.2 Install it in the reverse order of removal.

140

2. Removal of harness at right side of interior floor.

2.1.1.

Remove

the

glove

case.

(See

Disassembly/Reassembly of Instrument Panel)

2.1.2. Pull out the connector of front right door

harness.

2.1.3. Remove the right B pillar trim. (See

Disassembly/Reassembly of Seat Belt)

2.1.4. Pull out the connector of front right door contact

switch.

2.1.5. Pull out the connectors A and B of rear right

door harness.

2.1.6. Pull out the connector of auxiliary seat belt

switch.

2.1.7. Pull out the connector of rear right wheel speed

sensor.