Chery A15. Manual — part 137
Size of Piston Ring
Size of Connecting Rod Journal And Connecting-rod Bearing Shell
Class
Diameter of connecting
rod journal (unit: mm)
Thickness of connecting-rod bearing
shell (unit: mm)
Standard 47.89~47.91
1.480~1.487
Downsized by 0.025
47.89~47.91
1.492~1.499
Downsized by 0.25
47.64~47.66
1.605~1.612
Downsized by 0.5
47.39~47.41
1.730~1.737
Downsized by 0.75
47.14~47.16
1.855~1.862
Downsized by1.0
47.89~46.91
1.980~1.987
480# piston ring
Paint mark (type)
Size of gauge
No paint (Standard)
79.94
Purple paint (oversized by 0.29)
80.23
Blue paint (oversized by 0.5)
80.44
TD-8
Diameter of Main Journal And Size of Main Bearing Shell
Class
Diameter of main
journal (unit: mm)
Diameter of the main bearing
bore of the cylinder block
(unit: mm)
Thickness of the main
bearing shell (unit: mm)
Standard 57.98~58.00 62.2935+0.0065 2.131~2.138
Oversized by 0.4
57.98~58.00
62.6935+0.0065 2.331~2.338
Downsized by
0.02
57.98~58.00 62.2935+0.0065 2.141~2.148
Downsized by
0.25
57.73~57.75 62.2935+0.0065 2.256~2.263
Downsized by
0.50
57.48~57.50 62.2935+0.0065 2.381~2.388
Downsized by
0.75
57.23~57.25 62.2935+0.0065 2.506~2.513
Downsized by
0.25 and
oversized by 0.4
57.73~57.75 62.6935+0.0065 2.456~2.463
Downsized by
0.50 and
oversized by 0.4
57.48~57.50 62.6935+0.0065 2.518~2.558
Downsized by
0.75 and
oversized by 0.4
57.23~57.25 62.6935+0.0065 2.706~2.713
Size of Crankshaft Thrust, Thrust Spacer And Cylinder Block Thrust
Class
Size of cylinder block thrust
(unit: mm)
Size of crank shaft thrust (unit:
mm)
Thickness of thrust
spacer (unit: mm)
Standard 24+0.03 28.825-28.875
2.326+0.025
Oversized
by 0.38
24+0.03 29.205-29.255
2.516+0.025
TD-9
LUBRICATION SYSTEM
Lubricant Spec. (at above -10°C) SAE10W/30—50(SG grade)
Fuel Spec.
93 # Regular unleaded gasoline
Oil pressure (Idling Speed)
100Kpa
Oil pressure 2000r/min (water temperature 80℃) 280Kpa
Oil capacity (L)
3.86
Opening pressure of the pressure control valve, oil pump
(Kpa)
440±20
Opening pressure of the bypass valve, Oil Filter (Kpa)
78—118
Coolant Mixing Ratio
50% glycol +50% soft water (volume ratio)
Coolant Capacity (complete vehicle) (L) 8
Initial opening temperature of thermostat (℃) 85—89
Full open temperature of thermostat
99—102
Cap Pressure, expansion tank (Kpa)
160
Low-speed gear
High-speed motor 2000±200
Low-speed motor 1800±200
Fan speed
(r/min)
High-speed gear
High-speed motor2800±200
Low-speed motor2600±200
TD-10
COOLING SYSTEM
Cooling System
Parameters
Overall system capacity(L) 8
Engine capacity(L) 3.3
Radiator capacity(L) 2.1
Capacity of Coolant
Capacity of expansion tank(L) 0.4
Diameter: 280mm
Number of blades: 6
Working voltage: 9-15V
Rotating speed: Gear I: High-speed motor 2000±200
Low-speed motor 1800±200
Fan
Rotating speed: Gear II: High-speed motor 2800±200
Low-speed motor 2600±200
Diameter of impeller: ф72mm
Gear ratio: 1.053: 1
Water pump
Opening force of pressure cap: 160kPa
Front face area 0.202m²
Radiator
Radiation area 8.93m²
Opening temperature 85º-89º
Thermostat
Full open temperature 99º-102º
Switch-on temperature Gear I 95 Cº Gear II 102 Cº
Switch-off temperature Gear I≤84 Cº Gear II≤91 Cº
Thermal switch
Working voltage: 12V
CTS
ResistanceΩ: 70 Temperature Cº: 159±21.3
90 86.7±11
110 52.3±6.3
124 28.2±2.8
TD-11
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст