Chery A15. Manual — part 60
DISASSEMBLY AND ASSEMBLY OF THE OUTPUT SHAFT NEEDLE BEARING
Disassembly:
——Remove the needle bearing by special tool,
see the picture.
Assembly:
——Press the needle bearing to its right position
by special tool.
Special Tool
Special Tool
J-31
DISASSEMBLY AND ASSEMBLY OF THE GEARSHIFT SHAFT
——It need not to break down the transmission
assembly.
Disassembly:
——Put transmission assembly on the shelf or
workbench.
— — Leave it on the neutral position. (The
gearshift shaft move smoothly on arrowhead
direction)
——Screw off the gearshift positioning holder
assembly.
——Unscrew the bolt cover by special tool and
take off gearshift shaft.
——See the picture, press the spring holder to the
arrowhead direction to compress the internal
spring. Keep at this position until disassemble
the snap ring No.2.
Assembly:
——The assemble process is opposite to above
process.
Main point:
——Make sure the fork system on neutral gear.
——Moment to fasten bolt cover is 50Nm.
——Moment of fastening the gearshift shaft
positioning holder is 40Nm.
Special Tool
J-32
DISASSEMBLY AND ASSEMBLY OF INPUT SHAFT NEEDLE BEARING
Disassembly:
——See the picture, dismantle the needle bearing
by special tool.
Special Tool
Special Tool
Assembly:
——See the picture, assemble the input shaft
needle bearing by special tool, and make sure
press it to the right position.
Special Tool
Special Tool
J-33
DISASSEMBLY AND ASSEMBLY OF THE INPUT SHAFT OIL SEAL
Disassembly:
——It need not to break down the transmission
when disassemble the input shaft oil seal.
See the picture, disassemble the input oil seal
according to the arrowhead direction by special
tool
Special Tool
Assembly:
——See the picture, lubricate the lip of the oil seal
and press the oil seal to its right position by
special tool.
Special Tool
J-34
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст