Chery A11. Manual — part 61
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
3.6、Installing input shaft and clutch E assembly
After applying lubricant or petrolatum
to O ring, install it into piston E 30
050.
-91-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Press piston E into the cylinder body of engine
input shaft 30 010.
Install two U washers 30 080 on the top of the
piston with installing tool 5×46 000 148, and fix
with snap ring 30 090.
Install the whole clutch E assembly.
Install outer teeth steel sheet 30 100, and then
install inner teeth friction plate 30 110, and install
alternately.
-92-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Install retainer ring 30 120 on the top of clutch
assembly.
If the group numbers of the clutch inner friction
plate and sheet steel is changed, the outer diameter
of the retainer ring shall be changed accordingly.
Install snap ring 30 130.
Install washer 30 020 and 30 030 into input shaft,
and make them interlocked.
Install thrust washer 30 040, and adjust its position.
Insert input shaft assembly into the housing.
Install correctly, engage gear ring with sun gear
shaft.
-93-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
3.7、Assembling clutch A assembly
Install 2 O-ring 02 068 and on piston and
apply lubricant to piston.
-94-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст