Chery A11. Manual — part 50
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Second step, pull out snap ring of the center seat
with 2 hooks.
Loosen connecting bolt, separate central seat
from pump body.
Only plastic hammer can be used to remove.
If removing in proper working process, piston
ring and locating pin must be maintained in
central seat.
Remove spring, valve core and cap.
-47-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
2.5、Removing clutch B and 2
nd
one-way
overrun clutch
Remove cotter snap ring and clutch B assembly.
Press pressure plate with special tool 5 x 46 000
146, then remove snap ring and thrust washer.
Remove diaphragm spring and pressure plate.
-48-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Insert the air gun into oil inlet hole; remove
pistion B using HP gas. One-way overrun clutch
can not be further disassembled.
2.6、Removing clutch A
Using appropriate snap ring plier, remove snap
ring.
Remove worm rod from instert direction.
-49-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Remove the snap ring, clutch A assembly and
diaphragm spring in order.
Using special tool 5 x 46 000 167 press piston
with flow guiding flange, then remove snap ring
with
appropriate tool.
Insert air gun from oil inlet, remove piston,
washer and shim spring using HP gas.
-50-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст