Chery SQR 7160 sedan. Manual — part 57
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
Install locator 5P 95 000 289 on output shaft top,
and fix it on the transmission housing.
Install locator on the driven shaft and fix it on the
housing with bolts.
Turn over transmission by 180°.
Remove 11 connecting bolts. Remove side cap
and gasket.
Tool: 27# quincunx socket spanner
-38-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
As shown on figure, apply stop shift, using
appropriate tool, loosen rear sub output gear
mounting bolt.
After removing main rear and sub rear output
gear with appropriate tool, new transmission
rear output gear can be removed by hand.
As shown on figure, remove the high speed
washer and oil guide channel.
-39-
The manual of 4HP14 A/T removing and installing CHERY AUTOMOBILE CO., LTD
If necessary, using special tool 5 x 46 000 297
and 2 cotter spanners, remove rolling bearing
inner race in direction shown figure.
Turn over transmission by 180o, remove 2
holding units. Then, remove driven shaft with
governor still remained in housing.
If necessary, remove rolling bearing inner race
on driven shaft using socket 5 x 46 000 232.
-40-
The manual of 4HP14 A/T removing & installing CHERY AUTOMOBILE CO., LTD
Remove output gear and rear gear ring as an
assembly.
Remove slice gear C (refers to sub gear without
wheel).
Release parking position; remove governor cover
and governor assembly.
-41-
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст