Subaru Ascent (2022 year). Manual in english — page 14
(217,1)
!
Guidance screen
Models with front view monitor
Other models
When the “ENTER” or “VIEW/
” button
on the instrument panel is pressed and
held on this screen, the setting screen can
be displayed.
For details, refer to “Setting screen”
&
Setting screen
1. Press and hold the “ENTER” or “VIEW/
” button on the guidance screen. The
top menu is displayed.
2. Operate the “
” or “
” button to
select the preferred menu from the top
menu.
3. Press the “ENTER” or “VIEW/
”
button to enter the selected menu.
4. Operate the “
” or “
” button to
select the preferred menu from the 2nd
menu.
5. Press the “ENTER” or “VIEW/
”
button to enter the selected menu.
– CONTINUED –
Multi-function display (color LCD)
215
3
Instruments
and
controls
(218,1)
The menu lists are as follows.
Items that can be set when stopped:
Top menu
2nd menu
Description
Page
Date
Birthday
Set a birthday.
Anniversary
Set an anniversary day.
Go Back
Return to the 1st menu.
—
Display/Beep
Screen Off
Turn the screen off.
Yes or No
Favorite
Set and customize the triple meter.
Bypass Screen
Set the bypass screen for each item.
On or Off
Beep
Adjust the beep sound volume.
High, Low or Off
Go Back
Return to the 1st menu.
—
Camera set-
tings (if
equipped)
Brightness
Set and adjust the brightness of a display.
Contrast
Set and adjust the contrast of a display.
Camera Shift Link
Set the camera shift link.
On or Off
Go Back
Return to the 1st menu.
—
Maintenance
Engine Oil
Set and adjust the oil maintenance notification date.
Oil Filter
Set and adjust the oil filter maintenance notification date.
Tires
Set and adjust the tire maintenance notification date.
Maintenance Schedule
Set and adjust the vehicle maintenance notification date.
ON/OFF
Turn on or off the self-check screen that is
activated when the ignition switch is turned to the
“ON” position.
On or Off
Clear All Settings
Clear all settings for maintenance items.
Yes or No
Go Back
Return to the 1st menu.
—
Multi-function display (color LCD)
216
(219,1)
Top menu
2nd menu
Description
Page
Initialize
—
Reset all settings to the default settings.
Yes or No
Go Back
—
Return to the setting screen.
—
Items that can be set while driving:
Menu
Description
Page
Screen Off
Turn the screen off.
Yes or No
Go Back
Return to the setting screen.
—
For safety reason, we recommend that you stop the vehicle in a safe location when the setting.
– CONTINUED –
Multi-function display (color LCD)
217
3
Instruments
and
controls
(220,1)
!
Date and time settings
You can set the date, time and 12h or 24h
format settings.
!
Current date and time setting
For details about clock setting, refer to
“Clock”
!
Birthday setting
If a birthday or anniversary is approaching,
a message will be displayed when the
ignition switch is turned to the “ON”
position. This function can be set to on or
off. For details, refer to “Bypass screen
setting”
1. Select “Birthday” from the 2nd menu in
the setting screen. Refer to “Setting
screen”
2. Select from the list the number that you
want to register.
3. Enter the date and the text by using the
control switches.
4. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
NOTE
You can store a maximum of 5 birth-
days.
!
Anniversary setting
1. The procedure for setting an anniver-
sary is the same as “Birthday setting”
P218, except that in step 1 “Anniversary”
is selected.
NOTE
You can store a maximum of 5 anniver-
saries.
!
Display/Beep settings
You can set the display settings and
volume settings.
!
Screen OFF setting
1. Select “Screen Off” from the 2nd menu
in setting screen. Refer to “Setting screen”
2. Select “Yes” to turn off the screen.
Select “No” to return to the previous
screen.
Restoring the screen
When the “ENTER” or “VIEW/
” button is
Multi-function display (color LCD)
218
(221,1)
operated after the ignition switch is turned
to the “ON” or “ACC” position, the screen
will be restored. The screen will be
restored with the basic screen that was
displayed when the screen was turned off.
!
Favorite setting
1. Select the “Favorite” from the 2nd
menu in setting screen. Refer to “Setting
screen”
2. Set the desired items by using the
control switches. For details about items,
refer to “Favorite screen”
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
NOTE
.
You can display a maximum of the 3
items.
.
The same item cannot be selected
for the left, center or right location.
.
Weather information for 3 hours
later or 6 hours later can be displayed.
!
Bypass screen setting
1. Select “Bypass Screen” from the 2nd
menu in the setting screen. Refer to
“Setting screen”
2. Select “On” or “Off” to turn the display
of items on or off by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
NOTE
Traffic information setting is only dis-
played for the audio unit with SiriusXM
satellite radio.
!
Beep setting
1. Select “Beep” from the 2nd menu in the
setting screen. Refer to “Setting screen”
2. Set the beep volume by using the
control switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
– CONTINUED –
Multi-function display (color LCD)
219
3
Instruments
and
controls
(222,1)
!
Camera settings (if equipped)
You can set the front camera display
settings.
!
Brightness setting
1. Select “Brightness” from the 2nd menu
in the setting screen. Refer to “Setting
screen”
2. Select the brightness level by using the
control switches.
3. Press the “VIEW/
” button to confirm
the setting.
!
Contrast setting
1. Select “Contrast” from the 2nd menu in
the setting screen. Refer to “Setting
screen”
2. Select the contrast level by using the
control switches.
3. Press the “VIEW/
” button to confirm
the setting.
!
Camera shift link setting
1. Select “Camera Shift Link” from the
2nd menu in the setting screen. Refer to
“Setting screen”
2. Select “On” or “Off” by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
Multi-function display (color LCD)
220
(223,1)
!
Maintenance settings
You can set maintenance reminders.
!
Engine oil setting
1. Select “Engine Oil” from the 2nd menu
in the setting screen. Refer to “Setting
screen”
2. Set the date and distance of the
reminder by using the control switches.
3. Select “Set” to exit settings. Select
“Update” to change the notification dis-
tance to the default value. Select “Go
Back” to return to the previous screen
without applying the setting changes.
NOTE
.
The reminder will be displayed by
either date or distance in accordance
with the setting.
.
Even when either day or distance are
displayed as “_ _”, a pop-up screen will
appear.
.
The reminder will be displayed until
either of the following conditions is
satisfied.
– The period of time passed after
the registered notification date is 15
days or more.
– The total distance driven after the
registered notification distance is
approximately 311 miles (500 km) or
more.
!
Oil filter setting
The setting procedure is the same as
“Engine oil setting”
P221, but select the
“Oil Filter” item in step 1.
!
Tires setting
The setting procedure is the same as
“Engine oil setting”
P221, but select the
“Tires” item in step 1.
!
Maintenance schedule setting
The setting procedure is the same as
“Engine oil setting”
P221, but select the
“Maintenance Schedule” item in step 1.
!
On/Off setting
1. Select “On/Off” from the 2nd menu on
the setting screen. Refer to “Setting
screen”
2. Select “On” or “Off” to turn the opening
screen on or off by using the control
switches.
3. Select “Set” to exit settings. Select “Go
Back” to return to the previous screen
without applying the setting changes.
– CONTINUED –
Multi-function display (color LCD)
221
3
Instruments
and
controls
(224,1)
!
Clear setting
1. Select “Clear All Settings” from the 2nd
menu on the setting screen. Refer to
“Setting screen”
2. Select “Yes” or “No” by using the
control switches.
!
Initialize
You can initialize the items that have been
set to your preference.
1. Select “Initialize” from the 2nd menu on
the setting screen. Refer to “Setting
screen”
2. Select “Yes” or “No” by using the
control switches.
&
How to get the source code
using the open source
Free/Open Source Software Information
This product contains Free/Open Source
Software (FOSS).
The license information and/or the source
code of such FOSS can be found at the
following URL.
http://www.globaldenso.com/en/open-
source/ivi/subaru/
Multi-function display (color LCD)
222
(225,1)
3-10. Clock
The clock can be adjusted using either
auto mode or manual mode.
.
Auto mode: Automatic clock adjust-
ment
.
Manual mode: Manual clock adjust-
ment
CAUTION
The clock in the multi-function dis-
play (color LCD) cannot be adjusted,
if the SUBARU genuine navigation
and/or audio system is removed.
&
Setting the clock manually
!
Type A multi-function display (black
and white)
1. Turn the ignition switch to “ON”.
2. Press the
button.
3. Select “Settings”.
4. Select “Vehicle”.
5. Select “Time/Date” and then select
“Manual”.
6. Press the “+” button or the “−” button
beside the clock.
!
Setting 12-hour or 24-hour dis-
play
The clock can be set to 12-hour or 24-hour
display. Perform the following procedure to
switch the display format.
1. Turn the ignition switch in the “LOCK”/
“OFF” position.
2. Press and hold the “−” button located
near the clock display for approximately 5
seconds. The clock display will then start
to flash.
3. While the clock display is flashing,
press and hold the “+” button for approxi-
mately 2 seconds. The clock format will
then change.
– CONTINUED –
Clock
223
3
Instruments
and
controls
(226,1)
4. The clock display will continue to flash
for approximately 3 seconds to indicate
that the clock display has been changed.
!
Type B multi-function display (color
LCD)
1. Turn the ignition switch to “ON”.
2. Press the
button.
3. Select “Settings”.
4. Select “Vehicle”.
5. Select “Time/Date” and then select
“Manual”.
6. Set the each items plus and minus.
7. Select
to complete the clock
setting.
Select “Back” to return to the previous
screen without saving settings.
NOTE
.
Adjust the time, then select 12h
display or 24h display from the format.
.
The Birthday/Anniversary and main-
tenance reminder system function are
based on the time and date on the multi-
function display (color LCD).
&
Setting the clock automati-
cally
1. Turn the ignition switch to “ON”.
2. Press the
button.
3. Select “Settings”.
4. Select “Vehicle”.
5. Select “Time/Date”.
6. Select “Auto”.
Clock
224
(227,1)
!
Models with navigation system
The clock will be set automatically where a
GPS signal is available.
!
Models without navigation system
The clock will be set and adjusted auto-
matically when a smartphone is connected
via Bluetooth
®
for transferring phonebook
data.
1. Register the smartphone to the audio
system. For details, refer to “Bluetooth
SETTINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
2. Transfer phonebook data to the sys-
tem. For details, refer to “Bluetooth SET-
TINGS” in the supplemental Owner’s
Manual for the audio/navigation system.
The clock will be adjusted automatically.
NOTE
Depending on the model of smart-
phone, the settings of the connected
smartphone may need to be changed.
(ex: For iOS or other models, notifica-
tion settings may need to be activated.)
For details, check the instructions on
connecting smartphones.
&
Regulatory information
The Bluetooth
®
word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc.
3-11. Light control switch
&
Precautions and tips
CAUTION
.
Use of any lights for a long period
of time while the engine is not
running can cause the battery to
discharge.
.
Before leaving the vehicle, make
sure that the lights are turned off.
If the vehicle is left unattended
for a long time with the lights
illuminated, the battery may be
discharged.
Models with “keyless access with
push-button start system”:
The light control switch operates when the
push-button ignition switch is in the “ACC”
or “ON” position.
Regardless of the position of the light
control switch, the illuminated lights are
turned off when the push-button ignition
switch is turned off.
Models without “keyless access with
push-button start system”:
The light control switch operates when the
key is inserted in the ignition switch.
Regardless of the position of the light
– CONTINUED –
Light control switch
225
3
Instruments
and
controls
(228,1)
control switch, the illuminated lights are
turned off when the key is removed from
the ignition switch.
NOTE
The light control switch can be oper-
ated (except auto on/off headlights),
even under the following conditions.
.
When the push-button ignition
switch is turned off (models with “key-
less access with push-button start
system”).
.
When the key is not inserted into the
ignition switch (models without “key-
less access with push-button start
system”).
If the driver’s door is opened while the
headlights are illuminated under such
conditions, a chirp sound will inform
the driver that the lights are illuminated.
&
Headlights
Except for Canada models
For Canada models
To turn on the headlights, turn the knob on
the end of the turn signal lever.
“
” position:
Instrument panel illumination, headlights,
parking lights, front side marker lights, rear
side marker lights, tail lights and license
plate lights are on.
“
” position:
Instrument panel illumination, parking
lights, front side marker lights, rear side
marker lights, tail lights and license plate
lights are on.
“
” position:
.
Auto on/off headlights
When the ignition switch is in the “ON”
position, the instrument panel illumination,
headlights, parking lights, front side mar-
ker lights, rear side marker lights, tail lights
and license plate lights are automatically
on or off depending on the level of the
ambient light.
NOTE
The sensitivity of the auto on/off head-
lights can be changed by a SUBARU
dealer. Consult your SUBARU dealer
for details. Also, for models with a
combination meter display, the setting
can be changed using the display. For
details, refer to “Menu screens”
.
If the light control switch is in the
“AUTO” position and the headlights do
Light control switch
226
(229,1)
not turn on when it becomes dark outside,
turn the light switch to the “
” position.
.
Auto-on/off wiper-linked headlights
While the light control switch is in the
“AUTO” position, the headlights will auto-
matically turn on when the windshield
wipers operate several times. The head-
lights will automatically turn off when the
wipers stop.
NOTE
The ON/OFF setting of this function can
be changed by a SUBARU dealer.
Consult your SUBARU dealer for de-
tails.
“ ” position (except for Canada mod-
els):
The headlights are all off.
“OFF” position (for Canada models):
The headlights are all off *
1
*
2
.
*1: When the light switch is switched to the
“OFF” position while the vehicle is stopped,
the lights turn off. Then the light switch will
automatically return to the “AUTO” position.
*2: The headlights will automatically change to
the AUTO mode when the following condi-
tions are met:
.
The engine is running.
.
The parking brake is fully released.
.
The select lever is in a position other than the
“P” position.
!
Welcome lighting function
The welcome lighting function turns on the
low beam headlight for smooth approach-
ing to or exiting from the vehicle at night or
in a dark place.
The function is activated while all of the
following conditions are met.
.
The light control switch is in the “AUTO”
position.
.
It is dark enough to turn on the auto on/
off headlights.
NOTE
If the engine is turned off after turning
off the light switch, the welcome light-
ing function may not operate (for
Canada models).
When approaching:
While the welcome lighting function is
activated, the low beam headlights will
automatically illuminate when unlocking all
doors including the rear gate by using the
remote keyless entry system.
The low beam headlights will remain
illuminated for 30 seconds
*1
and then turn
off. However, if any of the following
operations is done, the low beam head-
lights will turn off.
.
The doors are locked.
.
The light control switch is turned to a
position other than “AUTO”.
.
The ignition switch is turned to the “ON”
position.
When exiting:
While the welcome lighting function is
activated, the low beam headlights will
remain illuminated even when either of the
following operation is done.
.
The push-button ignition switch is
turned to the “OFF” status (models with
“keyless access with push-button start
system”).
.
The key is pulled out from the ignition
switch (models without “keyless access
with push-button start system”).
The low beam headlights will turn off under
any of the following conditions.
.
3 minutes have passed since the low
beam headlights were illuminated by the
welcome lighting function.
.
30 seconds have passed since the door
is opened and closed.
*1
.
The light control switch is turned to a
position other than “AUTO”.
.
The locking procedure is performed
twice. When performing the unlocking
procedure after performing the locking
– CONTINUED –
Light control switch
227
3
Instruments
and
controls
(230,1)
procedure, perform the locking procedure
twice again.
*1: The setting for the period of time in which the
low beam headlights remain on by the
welcome lighting function can be changed
by a SUBARU dealer. Contact your
SUBARU dealer for details.
Also, for models with a combination meter
display, the setting can be changed using
the display. For details, refer to “Menu
screens”
!
Sensor for the auto on/off head-
lights
Models without automatic rain sensing
windshield wipers
Models with automatic rain sensing wind-
shield wipers
1)
Rain/light sensor
The sensor is as shown in the illustration.
CAUTION
If any object is placed on or near the
sensor, the sensor may not detect
the level of the ambient light cor-
rectly and the auto on/off headlights
may not operate properly.
&
High/low beam change (dim-
mer)
1)
High beam
2)
Low beam
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter is also on.
Light control switch
228
(231,1)
&
Headlight flasher
CAUTION
Do not hold the lever in the flashing
position for more than just a few
seconds.
To flash the headlights, pull the lever
toward you and then release it. The high
beam will stay on for as long as you hold
the lever.
When the headlights are on high beam, the
high beam indicator light “
” on the
combination meter also illuminates.
&
High beam assist function
NOTE
.
The high beam assist function uti-
lizes the stereo camera installed at the
position of the front map lights.
.
For details on how to handle the
stereo camera, refer to the Owner’s
Manual supplement for the EyeSight
system.
The high beam assist function automati-
cally changes the headlight from high
beam to low beam (or vice versa).
When all of the following conditions are
met, the headlight will change to high
beam.
.
When the vehicle speed increases to or
above 20 mph (32 km/h).
.
There is no preceding or oncoming
vehicle.
.
The forward area of the vehicle is dark.
.
The road does not have a sharp curve.
When any of the following conditions are
met, the headlight will change to low beam.
.
When the vehicle speed decreases to
or below 10 mph (16 km/h).
.
When the forward area of the vehicle is
bright.
.
When there is a preceding or oncoming
vehicle.
.
When the EyeSight system is malfunc-
tioning or temporarily stopped.
NOTE
.
Do not overestimate the capacity of
the high beam assist function. The
driver always has the responsibility to
understand the surrounding situation,
to drive safely, and to change the
headlight mode manually if necessary.
.
The factory setting (default setting)
for this function is set as “operational”.
This setting can be changed to OFF
(non-operation) at SUBARU dealers.
For more details, contact a SUBARU
dealer.
!
How to use the high beam assist
function
The high beam assist function will be
activated when all the following conditions
are met.
.
The light control switch is in the “AUTO”
position and the low beam headlights are
on automatically.
.
The turn signal lever is pushed forward.
– CONTINUED –
Light control switch
229
3
Instruments
and
controls
(232,1)
High beam assist indicator light
When the high beam assist function is
activated, the high beam assist indicator
light on the combination meter will illumi-
nate.
NOTE
If the high beam assist function is
malfunctioning or temporarily stopped,
the headlight will be fixed at low beam.
!
How to temporarily lower the sensi-
tivity of the high beam assist func-
tion
The sensitivity of the high beam assist
function can be lowered by performing the
following operations.
1. Before turning the ignition switch to the
“ON” position, set the light control switch to
the “AUTO” position and push the signal
lever forward (high beam position).
2. Turn the ignition switch to the “ON”
position and within approximately 15 sec-
onds, press the “
/ ” (following distance
setting) switch more than 10 times con-
secutively.
When the sensitivity of the high beam
assist function is lowered, the high beam
assist indicator light “
” on the combina-
tion meter will flash.
NOTE
.
The sensitivity of the high beam
assist function cannot be lowered in
the following conditions.
– The Cruise Control indicator or
Adaptive Cruise Control indicator is
illuminated.
– The EyeSight warning indicator
(yellow) is illuminated.
.
The sensitivity of the high beam
assist function returns to normal level
the next time the ignition switch is
turned to the “LOCK”/“OFF” position
and the engine is restarted.
!
How to change the headlight mode
manually
Change to the low beam:
When you return the turn signal lever to the
center position, the high beam assist
function will turn off and the high beam
assist indicator light will turn off.
Change to the high beam:
When you turn the light control switch to
the “
” position, the headlight mode will
be changed to the high beam.
At this time, the high beam assist function
will turn off, the high beam assist indicator
light will turn off and the high beam
indicator light will turn on.
NOTE
.
After manually changing the head-
light mode to the high beam, if you turn
on the high beam assist function,
return the light control switch to the
“AUTO” position.
.
When manually changing the head-
light mode to the high beam, if you turn
the light control switch to the “
”
position, the instrument panel illumina-
Light control switch
230
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст