Subaru Outback (2022 year). Manual in english — page 15
(231,1)
Touch “Default” to revert to the factory
setting.
!
Favorite Widgets
The menu on the favorite screen can be
customized.
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“General”
4.
?
“Favorite Widgets”
5. Select the icon of the display position.
6. Select the display item.
!
Birthday List
If a birthday or anniversary is approaching,
a message will be shown when the ignition
switch is turned to the “ON” position. This
function can be set to on or off by
“Reminder Screen”. For details, refer to
“General settings”
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“General”
4.
?
“Birthday List”
5.
?
“Add”
6. Enter the name.
7.
?
“Next”.
8. Enter the date.
9.
?
“OK”
– CONTINUED –
Center Information Display (CID)
229
3
Instruments
and
Controls
(232,1)
NOTE
A maximum of 5 birthdays can be
stored.
!
Anniversary List
The procedure for setting an anniversary is
the same as “Birthday List”
P229, except
that in step 4 “Anniversary List” is selected.
!
Driver Monitoring System (if
equipped)
The Driver Monitoring System settings can
be changed.
For setting method for the following menu
on the Driver Monitoring System, refer to
“ON/OFF setting”
.
Driver Monitoring System
.
User Recognition
.
Automatically Retract Seat on Entry
Repeat Facial Scan:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Repeat Facial Scan”
6.
?
“OK”
7. While seated in the driver’s seat, face
forward and wait for a few moments. When
the scan is completed, the completion
screen is displayed on the combination
meter (color LCD).
Register User:
1. Adjust the seat position, outside mirror
angle, and reverse tilt-down outside mirror
angle so that you are seated in the correct
driving posture.
NOTE
.
Start the user registration after ad-
justing the seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle. If they are adjusted during
user registration, it may be disrupted.
Refer to “Power Seat”
.
If the ignition switch is turned to the
“OFF” position before user registration
is complete, the information of the
adjusted seat position, outside mirror
angles, and reverse tilt-down outside
mirror angle will not be saved.
2. Touch
(HOME).
3.
?
(Settings)
4.
?
“Car”
5.
?
“Driver Monitoring System”
6.
?
“Register User”
7. Select the preferred user from the list.
Center Information Display (CID)
230
(233,1)
8.
?
“Set”
9. While seated in the driver’s seat, face
forward and wait for a few moments.
When the screen changes, the registration
of the facial scan is completed.
A)
Forward direction
B)
Display direction
1)
Face forward.
2)
Do not lower your chin.
3)
Face the display.
*: Display
NOTE
.
If user registration cannot be per-
formed, turn your face forward as
shown in the illustration, then turn to
the display.
.
There are some cases where user
registration cannot be registered prop-
erly. In those cases, refer to “Driver
Monitoring System”
.
If “Unable to register. Try again.”
appears, repeat the procedure begin-
ning from step 5.
10. Enter the name.
11.
?
“Next”
– CONTINUED –
Center Information Display (CID)
231
3
Instruments
and
Controls
(234,1)
12. Select the preferred icon.
13.
?
“Set”
NOTE
.
An existing user can be overwritten
by selecting a registered number. When
a user is registered by overwriting, the
individual fuel economy data is reset.
.
When “User Recognition” is set to
OFF, user registration cannot be se-
lected.
Update Seat and Mirror Position:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Update Seat and Mirror Position”
6.
?
“Set”
NOTE
.
Start the user registration after ad-
justing the seat position, outside mirror
angle, and reverse tilt-down outside
mirror angle. If they are adjusted during
user registration, it may be disrupted.
Refer to “Power Seat”
.
If the ignition switch is turned to the
“OFF” position before user registration
is complete, the information of the
adjusted seat position, outside mirror
angles, and reverse tilt-down outside
mirror angle will not be saved.
Delete Driver Position:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Delete Driver Position”
6.
?
“Yes”
Center Information Display (CID)
232
(235,1)
Delete User:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Delete User”
6. Select the preferred user from the list.
7.
?
“Yes”
Delete All Users:
1. Touch
(HOME).
2.
?
(Settings)
3.
?
“Car”
4.
?
“Driver Monitoring System”
5.
?
“Delete All Users”
6.
?
“Yes”
– CONTINUED –
Center Information Display (CID)
233
3
Instruments
and
Controls
(236,1)
!
Car information screen
1. Touch
(HOME) to display the top
menu.
2.
?
(Car Info)
!
Driving Statistics screen
Except for Subaru Outback Wilderness
For Subaru Outback Wilderness
1)
Driving Statistics
2)
Steering angle
3)
Running condition
4)
Vehicle posture
5)
Telltale screen
This screen displays the driving status of
the vehicle and the operation status func-
tions. For functions that are operating, the
indicator will illuminate or flash.
NOTE
.
The vehicle posture indication may
differ from the actual vehicle posture.
.
F o r O u t b a c k / S u b a r u O u t b a c k
Wilderness, when X-MODE has been
turned on, the screen of the center
information display will be changed to
the X-MODE screen.
.
The vehicle posture angle varies not
only due to the angle of the road
surface, but also due to the vehicle tilt
caused by the occupants, cargo, and
acceleration or deceleration.
Center Information Display (CID)
234
(237,1)
!
Advanced Package screen
1)
Advanced Package
2)
Driver Monitoring System*
1
3)
Pre-Collision Braking
4)
BSD/RCTA*
1
5)
Reverse Automatic Braking (RAB) sys-
tem*
1
6)
Information icon
7)
Lane Departure Warning
8)
EyeSight Assist Monitor
9)
High beam assist
10) Front view monitor*
1
*1: If equipped
This screen displays the advanced safety
functions status of the vehicle.
Touch “Advanced Package” from the 2nd
menu in the car info screen.
The advanced safety functions information
can be shown on the screen. Touch the
information icon on the screen.
NOTE
.
Indicators and icons are not dis-
played for functions that are not
equipped to the vehicle.
.
The indicators and icons of func-
tions that are not operating are dis-
played in gray.
!
Maintenance screen
Maintenance reminders can be set.
Engine Oil change reminder:
1. Touch “Maintenance” from the 2nd
menu in the car info screen.
2.
?
(Engine Oil)
3. Select “Notification Date” or “Notifica-
tion Distance” of the reminder.
4.
?
“Set”
5.
?
Oil Filter change reminder:
The setting procedure is the same as the
“Engine Oil” reminder, but touch the “Oil
Filter” item in step 2.
Tires rotation reminder:
The setting procedure is the same as the
“Engine Oil” reminder, but touch the “Tires”
item in step 2.
Maintenance Schedule setting:
The setting procedure is the same as the
“Engine Oil” reminder, but touch the
“Maintenance Schedule” item in step 2.
NOTE
.
Touch “Reset” to reset each setting.
.
Touch “Update” to revert to the
default value.
&
Dual 7.0-Inch Display Models
(If Equipped)
NOTE
For 11.6-inch display models, refer to
“11.6-Inch Display Models”
– CONTINUED –
Center Information Display (CID)
235
3
Instruments
and
Controls
(238,1)
!
Main screens
A)
Upper display
B)
Lower display
1)
HOME button (Refer to “HOME button”
2)
Status bar (Refer to “Status bar”
3)
Upper main screen (Refer to “Setting of
the upper display”
4)
Lower main screen (Refer to “Setting of
the lower display”
5)
Climate control screen (Refer to “Climate
control screen”
While the ignition switch is in the “ACC” or
“ON” position, the touch panel will activate.
!
HOME button
Press
(HOME) to display the top menu.
!
Status bar
The driver profiles icon, outside tempera-
ture and clock are shown on the display.
NOTE
.
The outside temperature indicator
shows the temperature around the
sensor. However, the temperature may
not be indicated correctly or the update
may be delayed in the following condi-
tions.
– While parking or driving at low
speeds
– When the outside temperature
changes suddenly (example: when
going in and out of an underground
parking area or when passing
through a tunnel)
– When starting the engine after
being parked for a certain period of
time
.
The temperature unit cannot be
changed.
.
The clock can be shown in either 12-
hour display or 24-hour display. For
details about the setting, refer to
“Clock”
.
Touch the clock on the status bar to
display the clock setting screen. Refer
to “Clock”
!
Upper display
For details about items, refer to “Setting of
the upper display”
For details about the following menu, refer
to the separate navigation/audio Owner’s
Manual.
.
Radio
.
Media
.
Phone
.
Apps
.
SUBARU STARLINK
.
Add to Shortcut
!
Lower display
For details about the setting items, refer to
“Setting of the lower display”
If this screen changes to the climate
control screen, refer to “Dual 7.0-Inch
Display Models”
Center Information Display (CID)
236
(239,1)
!
Climate control screen
1)
Airflow mode
2)
Climate control mode
3)
Air inlet selection
4)
Set temperature indicator
5)
Customizable icon
6)
Fan speed indicator
7)
Climate control On/Off button
When operating the climate control sys-
tem, the main screen switches to the
climate control screen. For details about
climate control operation, refer to “Climate
Control Panel”
!
Setting of the upper display
In this Owner’s Manual, the settings of the
“General” menu will be explained. For
details about other items, refer to the
separate navigation/audio Owner’s Man-
ual.
!
General settings
The “General” menu is used to set the
display, language and time.
1. Press
(HOME).
2. Touch
(Settings).
3.
?
“General”
4. Select the preferred menu.
– CONTINUED –
Center Information Display (CID)
237
3
Instruments
and
Controls
(240,1)
The setting adjustments to the following items can be manually changed to meet your personal requirements.
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
General
Clock
Time Setting
Sync With Phone/Manual
Clock Format
12H/24H
Display
Display Off
Turn the screen off.
—
Brightness Dial
ON/OFF
—
Brightness/Contrast
Set and adjust the brightness
and contrast of the screen dis-
play and camera display.
—
Reminder Screen
Maintenance
ON/OFF
Birthday
ON/OFF
Anniversary
ON/OFF
Meter Screen
Gauge Initial Movement
ON/OFF
Meter Information Screen
Eco Gauge/OUT TEMP/Clock/
Gas Range
Camera
Rear Camera Delay Control
ON/OFF
Steering Angle Lines
ON/OFF
Center Information Display (CID)
238
(241,1)
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
General
Climate Control
Customize Climate Button
A/C/MAX A/C/AUTO/Recircu-
lation
Language
—
English/Français/Español
and 211
Tire Pressure Units*
1
—
kPa/PSi
Home Screen Shortcuts
—
ON/OFF
*
2
Welcome Screen
—
ON/OFF
Goodbye Screen
—
ON/OFF
Birthday List
—
Set a birthday.
Anniversary List
—
Set an anniversary day.
SUBARU STARLINK Apps Re-
covery
—
OK/Cancel
*
2
—
SUBARU STARLINK Auto
Connect
—
ON/OFF
Factory Data Reset
—
Reset/Cancel
System Information
—
—
Free/Open Source Software
Information
—
—
*1: If equipped
*2: For details about the audio and navigation system, refer to the Owner’s Manual supplement for the audio and navigation system.
NOTE
Touch
to display the explanation of the items.
– CONTINUED –
Center Information Display (CID)
239
3
Instruments
and
Controls
(242,1)
!
Setting of the lower display
Touch
(Car Settings). Refer to “Vehicle
This screen displays the driving status of
the vehicle and the operation status of the
functions. Refer to “Driving Statistics”
Set the timing of the maintenance. Refer to
“Maintenance”
!
Vehicle settings while driving
Touch
(X-MODE),
(Vehicle Control),
(Driving Assistance),
(Others), or
(Auto Start Stop) to display the items that
are changeable while driving.
Center Information Display (CID)
240
(243,1)
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
X-MODE*
1
—
—
ON/OFF
Vehicle Con-
trol
Vehicle Dynamics Control
—
ON/OFF
Auto Vehicle Hold (AVH)
—
ON/OFF
Cruise Control Acceleration
Characteristics
—
Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3
(Standard)/Lv.4 (Dynamic)
*
2
—
Driving As-
sistance
Pre-Collision Braking
—
Setting ON/Setting OFF
*
2
—
Lane Departure Prevention
Function
—
All Functions/Lane Departure
Prevention Function Only/
Warning Buzzer Only/OFF
Auto Start
Stop
—
—
ON/OFF
Others
Warning Volume
—
Min/Mid/Max
*
2
Units
—
km, km/h, Liter/
Miles, MPH, Gallon
and 203
Auto Start Stop
—
ON/OFF
*1: For Outback/Subaru Outback Wilderness
*2: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
– CONTINUED –
Center Information Display (CID)
241
3
Instruments
and
Controls
(244,1)
!
Auto Start Stop ON/OFF icon
1)
Auto Start Stop indicator (green)
Touching “
” deactivates the Auto Start
Stop system and turns off the Auto Start
Stop indicator (green) on the screen.
Touching “
” again activates the Auto
Start Stop system and turns on the Auto
Start Stop indicator (green).
!
Vehicle setting icons
1. Press
(HOME).
2. Touch
(Car Settings).
Center Information Display (CID)
242
(245,1)
The setting adjustments to the following items can be manually changed to meet your personal requirements.
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
Car Settings
EyeSight
Pre-Collision Braking
Setting ON/Setting OFF
*
1
—
Lane Departure Prevention
Function
All Functions/Lane Departure
Prevention Function Only/
Warning Buzzer Only/OFF
*
1
—
Cruise Control Acceleration
Characteristics
Lv.1 (Eco)/Lv.2 (Comfort)/Lv.3
(Standard)/Lv.4 (Dynamic)
*
1
—
Select Drive on Left/Drive on
Right
Right Lane/Left Lane
*
1
—
Lead Vehicle Acquisition
Sound
ON/OFF
*
1
Lead Vehicle Moving Monitor
ON/OFF
*
1
EyeSight Assist Monitor
Red Indicator
ON/OFF
*
1
—
Yellow Indicator
ON/OFF
Green Indicator
ON/OFF
Keyless Entry System
Hazard Warning Flasher
ON/OFF
Defogger
—
15 minutes/Continuous
Interior Light
—
10 seconds/20 seconds/30
seconds/OFF
– CONTINUED –
Center Information Display (CID)
243
3
Instruments
and
Controls
(246,1)
Item
Available settings
Page reference
for the vehicle
system opera-
tion
Page reference
for the setting
procedure
1st menu
2nd menu
3rd menu
Car Settings
Auto Light Sensor
Light Sensitivity
Min/Low/Mid/Max
Wiper Link
ON/OFF
Welcome Lighting
Approaching Time Set
30 seconds/60 seconds/90
seconds/OFF
Leaving Time Set
30 seconds/60 seconds/90
seconds/OFF
One-Touch Lane Changer
—
ON/OFF
Auto Door Lock/Unlock
Auto Door Lock
Vehicle Speed/Shift into or out
of PARK/OFF
Auto Door Unlock
Ignition OFF/Driver Door Open/
Shift into or out of PARK/OFF
Rear Seat Reminder
—
ON/OFF
Vehicle Dynamics Control
—
ON/OFF
Auto Vehicle Hold (AVH)
—
ON/OFF
Auto Start Stop
—
ON/OFF
X-MODE*
2
—
ON/OFF
Warning Volume
—
Min/Mid/Max
*
1
Units
—
km, km/h, Liter/
Miles, MPH, Gallon
and 203
*1: For details about EyeSight system, refer to the Owner’s Manual supplement for the EyeSight system.
*2: If equipped
NOTE
Touch
to display the explanation of the items.
Center Information Display (CID)
244
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст