Jaguar XJ (X350). Manual — part 331

Install the exhaust manifold retaining nut.

Tighten to 25 Nm.

15 . Install the dipstick tube retaining bolt.

Tighten to 10 Nm.

16 . Attach the left-hand valve cover wiring harness.

17 . Connect the left-hand ignition coil electrical connectors.

18 . Attach the right-hand valve cover wiring harness.

19 . NOTE:

Left-hand shown, right-hand similar.

Install the engine compartment panel.

Tighten to 10 Nm.

20 . NOTE:

Left-hand shown, right-hand similar.

www.

Install the engine compartment panel retaining bolts.

Tighten to 10 Nm.

21 . Install the cabin air filter housing.

Tighten to 10 Nm.

22 . Install the cowl vent screen. <<501-02>>

23 . Install the engine cover.

24 . Connect the battery ground cable. <<414-01>>

Exhaust Manifold LH - VIN Range:
G004442->G45703 (30.15.55)

Removal

1 . Remove the left-hand catalytic converter.

For additional information, refer to Catalytic Converter - 3.0L/3.5L/4.2L (17.50.05)

2 . Lower the vehicle.

3 . Remove the engine cover.

4 . Detach the left-hand valve cover wiring harness.

5 . Remove the dipstick tube retaining bolt.

Reposition the dipstick tube.

www.