Jaguar XJ (X350). Manual — part 330
25 . NOTE:
Left-hand shown, right-hand similar.
Remove the engine mount.
Installation
1
.
CAUTION: Make sure the engine mount locators are correctly aligned on
installation.
NOTE:
Left-hand shown, right-hand similar.
Install the engine mount.
Tighten to 63 Nm.
2 . Carry out the front subframe alignment procedure. <<204-01>>
3 . Lower the vehicle.
4
.
CAUTION: Make sure the engine mounts locate into the correct position when the
engine is repositioned.
Using the special tools, reposition the engine.
5 . Raise the vehicle.
6 . NOTE:
Left-hand shown, right-hand similar.
Install the engine mount lower retaining bolts.
Tighten to 63 Nm.
www.
7 . Detach the steering gear.
8 . Attach the steering gear.
Tighten to 100 Nm.
9 . Install the steering gear shaft pinch bolt.
Tighten to 35 Nm.
10 . Install the left-hand catalytic converter. <<309-00>>
11 . Lower the vehicle.
12 . Remove the special tool.
13 . Remove the special tool.
14 . NOTE:
Left-hand shown, right-hand similar.
www.
Нет комментариевНе стесняйтесь поделиться с нами вашим ценным мнением.
Текст